1 / 2

"Calibration and Data Collection for Si-PM Setup Using Pulse Triggers"

This project involves building the entire experimental setup while focusing on the pulse trigger mechanism. Each Silicon Photomultiplier (Si-PM) will be calibrated separately to ensure accurate readings. Cosmic runs will be interleaved with the calibration runs to optimize the data collection process. The goal is to complete the calibration and set up the pulse trigger by Friday, allowing for the start of data acquisition. This meticulous approach aims to enhance the reliability and precision of our findings.

brier
Télécharger la présentation

"Calibration and Data Collection for Si-PM Setup Using Pulse Triggers"

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Build the entire set-up • Pulse trigger + calibrate each Si-PM separately • Take cosmic runs interleaved with calibration runs… Light Tight Box

  2. The plan: want to finish the calibration and pulse trigger until Friday… starting to take data…

More Related