1 / 3

AREVA (EMS Vendor ) Comments

Texas Nodal EMS & MMS AREVA & ERCOT Comments on Generation to be dispatched by SCED January 24, 2007 Sai Moorty MMS Project Engineer. AREVA (EMS Vendor ) Comments. Option 1 GTBD =  ∑Genactual

brigid
Télécharger la présentation

AREVA (EMS Vendor ) Comments

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Texas Nodal EMS & MMSAREVA & ERCOT Comments on Generation to be dispatched by SCEDJanuary 24, 2007Sai MoortyMMS Project Engineer http://nodal.ercot.com 1

  2. AREVA (EMS Vendor ) Comments • Option 1 GTBD =  ∑Genactual • AREVA believes this does not do enough to help the system recover frequency deviations. The concern is that the system would always be 'behind' where it needs to be. • Option 2 GTBD =  ∑Genactual + ∑NCLactual - ∑NCL30 min average  + PSCED * LRR • High complexity. • The problem is not the NCL values, but the LRR value. • Many other systems have struggled to get a reliable calculation for LRR. For example, if this is just the average load rate over an hour, does that mean that recognition of the peak (load turn-around point) will be delayed by as much as half an hour? Then there is the issue of what to do with the near-term load swings. • Also, it is easier to implement to compare the current NCL with a filtered NCL. • Option3 (Alternative proposal by AREVA) GTBD =  ∑Genactual + Frequency Recovery MW - (∑NCLactual - ∑NCLfiltered) • Frequency Recovery MW is load damping (DDf) component. • Addresses the points of concern and be much easier to implement/maintain. • This approach will provided the MW boost to address frequency deviation while not causing the system to swing to the other extreme when the nonconforming load swings. http://nodal.ercot.com 2

  3. ERCOT Comments • Nodal EMS Project does not have Short Term Load Forecast. LRR calculation will be based on actuals. • Assumption that LMPs calculated by SCED is effective from the time SCED is executed till the time of next SCED execution. http://nodal.ercot.com 3

More Related