1 / 21

Titre

Titre. eNod3. Digital process controller. Tous droits réservés – Le contenu et les spécifications peuvent être modifiés sans avis préalable. Presentation. What is eNod3 ?. eNod3 is a measurement transmitter and powerful weighing process controller.

cameo
Télécharger la présentation

Titre

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Titre eNod3 Digital process controller Tous droits réservés – Le contenu et les spécifications peuvent être modifiés sans avis préalable

  2. Presentation What is eNod3 ? eNod3 is a measurement transmitter and powerful weighing process controller • It transforms any strain gauge sensor into intelligent digital system. • eNod3-C allows the control of static process as well as dynamic. • eNod3-D allows the control of mono-product dosing processes.

  3. Measurement transmitter Checkweigher Peak control 1 2 3 • High speed measurement acquisition and transmission • Triggering and samppling functions • Cycle management dedicated to dynamic weighing • Calculation functions for sorting process and checkweighing • Acquisition and calculation of directly usable values (Min, max, peak to peak) • Cycle management dedicated to manufacturing process Presentation eNod3-C applications eNod3-C includes three advanced operating modes to release the automatism

  4. Measurement transmitter Dosing 1 2 • High speed measurement acquisition and transmission • Triggering and samppling functions • Mono-product dosing by filling or by unloading • Fine and coarse feed management • Automatic in-flight correction Presentation eNod3-D applications eNod3-D includes two advanced operating modes to release the automatism

  5. eNod3-C/D JB4 • eNod3-C/D BOX • Aluminum housing • Direct connection and trimming of 4 load cells • Protection IP65 • Aluminum housing • Direct connection of 1 load cell • Protection IP65 • eNod3-C/D DIN • Board on DIN rail support Presentation A choice of several versions Its various housing allow a perfect adaptation to the environment

  6. Load cells Force sensors Torque sensors Pressure sensors Interfaces eNod3 Sensor input eNod3-C/D is able to run up to 4 strain gauge sensor, with 4 or 6wire connection • Power supply 10-28Vdc • Up to 4 load cells, resistance 350W • Standard input range: 0 - 7,8mV/V • 4 or 6wire connection

  7. Interfaces Communication eNod3-C/D interfaces allow an easy integration to the automated systems Automate 1 … 32 • eNod3-C/D • eNod3-C/D supports MODBUS-RTU, SCMBUS and CAN-Open • One RS485/RS232 selectable output • Half/Full duplex selectable • One CANbus 2B output • CANopen and SCMBUS: Optimized protocols for eNod3 • High speed transmission up to 1000meas/s. • Periodic or triggered measurement transmission • Perfect connectivity with Schneider Electric PLCs

  8. 2 Inputs 2 Outputs Set points control • 2 opto-isolated logical inputs • Hysteresis mode • Windows mode • Assignment to Triggering, Zero, Tare, or Clear functions • Adjustable debbouncing • 2 opto-isolated logical outputs (static relays) • Assignment to set point control, Default, input recopy, measurement ready • Relays contact rating 55V/400mA Interfaces eNod3-C logical input / output PLC

  9. Logical I/O • 2 opto-isolated inputs • Cycle start, Zero, Tare, Clear • Adjustable debbouncing • 4 opto-isolated outputs • Fine/Coarse feed, emptying/ejection, limits control, Defect • Static relays 55V/400mA Interfaces eNod3-D logical Input / outputs AK Load cell PLC

  10. RS232 communication Interfaces transmitter RS485 Gross/Net • Triggering • sampling CAN Checkweigher Result weight • Triggering • Average device I/O management 2 In 2Out Peak control Min/Max Peak-peak • Triggering • Calculation Structure eNod3-C Internal structure Sensor Pts ADC A D Signal processing • Filtering • Calibration • Scaling • Zero, Tare regulator 10-28Vdc EEPROM eNod3 µP

  11. RS232 communication Interfaces RS485 CAN Dosing I/O management • Filling • Unloading 2 I 4O • Cycle control • Fine/coarse feed • In-flight correction • Ctrl limits • Emptying Structure eNod3-D Internal structure Sensor Pts ADC A D Signal processing transmitter Measure Gross/Net • Triggering • sampling • Filtering • Calibration • Scaling • Zero, Tare regulator 10-28Vdc EEPROM Dosing results eNod3 µP

  12. Signal processing Amplification - conversion Converter µControler Converter • Scaling • ±1 000 000 pts max • Input signal: 7.8mV/V, ±7.8 mV/V • Sampling frequency 4KHz • 24 bits resolution • Low-pass filter Post-Filtering • Butterworth • Auto-adaptative Converter rate 6.25 to 1600Hz

  13. Measurement transmission eNod3-C/D - Transmitter mode • eNod3-C/D allows high speed measurement acquisition and transmission MODBUS-RTU, SCMBUS Triggered transmission (SCMBus & CANopen) PLC Protocole Bds rate Nb meas/s SCMbus 115200 900 MODBUS 115200 400 CANopen 1000

  14. Process • eNod3-C makes high speed measurement acquisition • eNod3-C calculates the weight value and send it to the PLC Load cell signal time communication Dynamic weighing eNod3-C - Checkweigher mode PLC

  15. Dynamic weighing eNod3-C - Checkweigher mode • Level triggering Process • Cycle management without detector • Sample with limit value control Automate

  16. Dynamic weighing eNod3-C - Checkweigher mode • External triggering Processus • Cycle management with detector PLC

  17. Process control eNod3-C - Peak detection mode Process • Min, Max and Peak-to-Peak value acquisition. • Level or external Triggering management PLC Force Max. Value Load cell signal time Automate

  18. Dosing eNod3-D - Dosing by filling mode Coarse feed Fine feed Emptying Start PLC

  19. Dosing eNod3-D - Dosing by unloading mode Loading Coarse feed Fine feed Start PLC

  20. eNodView What is eNodView ? • eNodview offers many tools to facilitate eNod3 implementation. • It allows parameter setting and calibration of eNod3. • It’s also a powerful measurement acquisition and analysis software.

  21. eNodView Which functionnalities ? 1 2 3 Set up Analyse Real time display • Automatic detection of all eNod connected to the network • Access to all eNod3-C/D parameters • physical or theoretical calibration • Measurement aquisition and displaying • Frequency analysis (FFT) • Digital filters simulation and displaying • Graphical supervision of dosing processes

More Related