E N D
1. Hazard Analysis and Critical Control Points History, Overview, and Prerequisites
Food Microbiology
2. First Part Conducting a Hazard Analysis
Second Part Identifying Managing and Implementing Critical Control PointsFirst Part Conducting a Hazard Analysis
Second Part Identifying Managing and Implementing Critical Control Points
3. Definitions--
Science based, common sense prevention approach to food contamination
Common sense application of technical and scientific principles to the food production process from field to table
A preventive system for assuring the safe production of food products
A systematic approach to be used in food production as a means to assure food safety Many Book Definitions
DO NOT know all of these.Many Book Definitions
DO NOT know all of these.
4. SO WHAT IS HACCP????? Common Terms
Science
Common Sense
Prevention
Food Safety
KNOW THIS----
Use science and common sense to prevent food safety hazards.
Management Tool and Thought Process
Common Terms
Science
Common Sense
Prevention
Food Safety
KNOW THIS----
Use science and common sense to prevent food safety hazards.
Management Tool and Thought Process
5. 1959 - Pillsbury
NASA
Natick Laboratories of US Armed Forces
U.S. Air Force Space Lab Project Group
Why????? Safe Food for Astronauts
Prevent Illness that might cause Aborted Mission
Wanted Close to 100% Assurance that Food was not Contaminated
QC Techniques Could not Assure close to 100% Safe
Must Test all Food
Nothing left to Eat
New System Developed
Process Control
Recordkeeping
Safe Food for Astronauts
Prevent Illness that might cause Aborted Mission
Wanted Close to 100% Assurance that Food was not Contaminated
QC Techniques Could not Assure close to 100% Safe
Must Test all Food
Nothing left to Eat
New System Developed
Process Control
Recordkeeping
6. 1985- National Academy of Sciences
Recommended that HACCP be adopted by all regulatory agencies and mandatory for food processors
NACMCF (National Advisory Committee on Microbiological Criteria for Foods)
Standardized HACCP Principles
7. NACMCF - 7 Principles of HACCP:
Conduct a Hazard Analysis
Identify Critical Control Points (CCP)
Establish Critical Limits for CCP
Establish Monitoring Procedures
Establish Corrective Actions
Establish Verification Procedures
Establish Recordkeeping Procedures
8. HACCP is NOT a regulation!!!!!!!! It is a food safety tool!!!
Regulatory
Seafood
Meat and Poultry
Juice
Soon Egg
Dairy?
All Industry can follow and SHOULDHACCP is NOT a regulation!!!!!!!! It is a food safety tool!!!
Regulatory
Seafood
Meat and Poultry
Juice
Soon Egg
Dairy?
All Industry can follow and SHOULD
9. HANDOUT Flow Diagram
MUST BE DEVELOPED PRIOR TO DEVELOPING A HACCP PLAN Clear, Simple Description of Steps of Process
Guide for HACCP Team
Future Verification
All Steps under control of Establishment
Verify
Review and Modify Periodically
Clear, Simple Description of Steps of Process
Guide for HACCP Team
Future Verification
All Steps under control of Establishment
Verify
Review and Modify Periodically
10. EXAMPLE GROUND BEEF PRODUCTION
11. Step 1 - Receiving
12. Step 2 - Storage
13. Course Grind
14. Course Grind
15. Fine grind
16. Packaging
17. Distribution
18. Principle 1 - Conduct a Hazard Analysis
TWO STEPS
Hazard Identification
Hazard Evaluation/Controls
List steps in process where Significant Hazards likely to Occur and Describe Control Measures
Hazards must by a Risk Significant enough so that Control is Essential for Safe Food
Identify Control Measures
Hazard Identification
Brainstorm
List all Potential Hazards
Hazard Evaluation
Base on Severity and Likelihood of Occurrence
Consider Short Term and Long Term Exposure
List steps in process where Significant Hazards likely to Occur and Describe Control Measures
Hazards must by a Risk Significant enough so that Control is Essential for Safe Food
Identify Control Measures
Hazard Identification
Brainstorm
List all Potential Hazards
Hazard Evaluation
Base on Severity and Likelihood of Occurrence
Consider Short Term and Long Term Exposure
19.
Biological
Bacteria, Viruses, Yeast and Molds, Prions Micro
Macro Rodents, Flies
Chemical
Sanitizers, Antibiotics, Hormone
Physical
Metal or Glass Pieces, etc.
Biological
Bacteria, Viruses, Yeast and Molds, Prions Micro
Macro Rodents, Flies
Chemical
Sanitizers, Antibiotics, Hormone
Physical
Metal or Glass Pieces, etc.
20. Physical Heat/Pasteurization and Sterilization
Steam Vac, Steam Past.
Chemical
Additives
Carcass washes
Biological
LABPhysical Heat/Pasteurization and Sterilization
Steam Vac, Steam Past.
Chemical
Additives
Carcass washes
Biological
LAB
21. An estimate of likely occurrence of hazard
Based on - Experience, epidemiological data, and other information from the scientific literature.
Severity is the seriousness of the risk.
22. A tool to Determine Risk
24. Hazard Analysis
25. Principle 2 - Identify CCP
CRITICAL control points
Point, step or procedure at which Control can be Applied and a Food Safety Hazard can be Prevented, Eliminated or Reduced to Acceptable Levels
A step at which control can be applied and is essential to prevent or eliminate a food safety hazard or reduce it to an acceptable level-NACMCF
Loss of Control Results in an Unsafe Product
Several Steps in Process where Hazards are Controlled
Only a Few Points are CRITICAL
Steps That are Critical in One Process may not be Critical in Another
Based on Hazard Analysis
Point, step or procedure at which Control can be Applied and a Food Safety Hazard can be Prevented, Eliminated or Reduced to Acceptable Levels
A step at which control can be applied and is essential to prevent or eliminate a food safety hazard or reduce it to an acceptable level-NACMCF
Loss of Control Results in an Unsafe Product
Several Steps in Process where Hazards are Controlled
Only a Few Points are CRITICAL
Steps That are Critical in One Process may not be Critical in Another
Based on Hazard Analysis
27. Determining CCPs
28. Principle 3 - Establish Critical Limits
Base on Scientific Literature and/or Regulatory Standards Parameters to Define if a CCP is in or out of control
maximum and/or minimum value to which a biological, chemical, or physical parameter must be controlled at a CCP to prevent, eliminate, or reduce to an acceptable level the occurrence of a food safety hazard. NACMCF
Temperature
Time
Time/Temperature Combinations
pH
Aw
Nitrite Content
Salt Content
Parameters to Define if a CCP is in or out of control
maximum and/or minimum value to which a biological, chemical, or physical parameter must be controlled at a CCP to prevent, eliminate, or reduce to an acceptable level the occurrence of a food safety hazard. NACMCF
Temperature
Time
Time/Temperature Combinations
pH
Aw
Nitrite Content
Salt Content
29. For Each CCP
Determine if there is a regulatory limit
Determine if there is scientific evidence
If no regulatory limit or scientific evidence then consult with University/Industry Experts
Conduct Validation Study if Necessary
30. Principle 4- Monitor CCP
Assess whether CCP is under control and Record
Visual Observations
Physical Measurement
Track System Operation
Trends Toward Loss of Control
Action Taken before Limit Exceeded
Determines when There is Loss of Control and Corrective Action Needed
Provides Written Documentation for use in Verification of HACCP Plan
Visual Observations
Physical Measurement
Track System Operation
Trends Toward Loss of Control
Action Taken before Limit Exceeded
Determines when There is Loss of Control and Corrective Action Needed
Provides Written Documentation for use in Verification of HACCP Plan
31. For Each CCP
Determine the Best Monitoring Procedure
Determine the Frequency of Monitoring and Documentation
Determine Decision Criteria
Acceptable or Unacceptable
32. Principle 5 - Establish Corrective Action What are you going to do when there is a deviation from critical limit?
Reprocess
Hold
Destroy Product
Must Be taken because a CL has been exceeded and a potential hazard may result
procedures followed when a deviation occurs NACFM
Specific CA must be established for each CCP
What are you going to do when there is a deviation from critical limit?
Reprocess
Hold
Destroy Product
Must Be taken because a CL has been exceeded and a potential hazard may result
procedures followed when a deviation occurs NACFM
Specific CA must be established for each CCP
33. Stop the Line and Correct Problem
Hold and Evaluate Product in Question
Continue Production after Process Brought back into Control
Identify Long-Term Solutions
34. Determine and Correct the Cause on Noncompliance
Determine the Disposition of Non-Compliant Product
Record the Corrective actions Taken
Who is Responsible for Initiating the Corrective Action
Who is Responsible for oversight
36. Principle 6 - Verification
Critical Limits at CCP Satisfactory
HACCP plan Functioning
Validations
Generate Scientific Data to Support Plan
Regulatory Responsibility and Actions to Ensure HACCP Functioning Those Activities other than Monitoring that Determine the Validity of and Compliance with the HACCP Plan
Those Activities other than Monitoring that Determine the Validity of and Compliance with the HACCP Plan
37. Determine if HACCP Plan is Working
Are Hazards Reduced by Plan?
Initial Verification
Periodic Verification
Determine if Operations are in Compliance with HACCP Plan
Has HACCP been Implemented Properly?
On-Going Activities
Calibrations
Record Reviews
Annual Review of Plan
Microbial testingCalibrations
Record Reviews
Annual Review of Plan
Microbial testing
38. Principle 7 - Recordkeeping
HACCP Team
Product Description
Flow Diagrams
Hazards, CCP and Preventive Measures
Critical Limits
Monitoring System
Corrective Actions
Recordkeeping Procedures
Verification Procedures The HACCP Plan
Records obtained during operation of plan
Supportive Documentation
Daily CCP Records
Calibration records
Receiving log for ingredients, packaging
Employee Training Records
Validation of HACCP Plan
Daily Review for Completeness
Review for deviations and irregularities
Follow-up on product disposition
Designated, responsible individual
Initial and date
Keep them organized
The HACCP Plan
Records obtained during operation of plan
Supportive Documentation
Daily CCP Records
Calibration records
Receiving log for ingredients, packaging
Employee Training Records
Validation of HACCP Plan
Daily Review for Completeness
Review for deviations and irregularities
Follow-up on product disposition
Designated, responsible individual
Initial and date
Keep them organized