1 / 11

H12-222_V2.5 HCIP-Routing & Switching-IENP V2.5 Exam Dumps

Passcert new released H12-222_V2.5 HCIP-Routing & Switching-IENP V2.5 Exam Dumps, which simulate the real exam to ensure you pass your exam successfully.

carrorsstephen
Télécharger la présentation

H12-222_V2.5 HCIP-Routing & Switching-IENP V2.5 Exam Dumps

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. H12-222_V2.5 Free Dumps HCIP-Routing & Switching-IENP V2.5 https://www.passcert.com/H12-222_V2.5.html

  2. 1. Which of the following SNMP packets are sent to the NMS by the Agent on the managed device? A. Response B. Get-Request C. Get-Next-Request D. Set-Request Answer: A Download Passcert Latest & Valid H12-222_V2.5 Free Dumps To Ensure Your Success

  3. 2. What types of protocols can eSight use to discover network elements? (Multiple choice) A. SNMP protocol B. netconf protocol C. Telnet protocol D. ICMP protocol Answer: ABC Download Passcert Latest & Valid H12-222_V2.5 Free Dumps To Ensure Your Success

  4. 3.Which of the following statements about traffic shaping are correct? (Multiple choice) A. Traffic shaping can only be used in the outbound direction B. Traffic shaping will discard excess traffic C. Traffic shaping will cache the excess traffic D. Traffic shaping can only be used in the inbound direction Answer: AC Download Passcert Latest & Valid H12-222_V2.5 Free Dumps To Ensure Your Success

  5. 4. When the stateful inspection firewall forwards subsequent data packets (not the first packet), which of the following is the main basis? A. MAC address table B. Session table C. Route table D. FIB table Answer: B Download Passcert Latest & Valid H12-222_V2.5 Free Dumps To Ensure Your Success

  6. 5. Which of the following is the broadcast domain of VXLAN called? A. Exchange domain B. Bridge domain C. VLAN domain D. Wide finger area Answer: B Download Passcert Latest & Valid H12-222_V2.5 Free Dumps To Ensure Your Success

  7. 6. When the BFD detection interval at both ends is 30ms and 40ms respectively, which of the following descriptions is correct? A. The bfd session cannot be established. B. The bfd session can be established, 30ms after negotiation. C. The bfd session can be established, and it takes 40ms after negotiation. D. The bfd session can be established, and each is sent at its own time interval. Answer: D Download Passcert Latest & Valid H12-222_V2.5 Free Dumps To Ensure Your Success

  8. 7. The network management workstation manages network devices through the SNMP protocol. When an abnormality occurs in the managed device, which SNMP message will the network management workstation receive? A. Get-Response message B. Set-Request message C. Get-Request message D. Trap message Answer: D Download Passcert Latest & Valid H12-222_V2.5 Free Dumps To Ensure Your Success

  9. 8. Configuring DHCP Snooping can be used to prevent counterfeit attacks. Which of the following steps should be included in the configuration process? (Multiple choice) A. Configure interface trust status B. Enable global DHCP function C. Enable DHCP Snooping on the interface or VLAN D. Enable the global DAI Snooping function Answer: ABC Download Passcert Latest & Valid H12-222_V2.5 Free Dumps To Ensure Your Success

  10. 9. Which of the following descriptions about the S field in the MPLS packet header is correct? (Multiple choice) A. The S bit exists in every MPLS packet header. B. The S bit has only 1 bit in the frame mode and 2 bits in the cell mode. C. It is used to mark whether there are other labels after this label, 1 means yes, 0 means no. D. It is used to mark whether there are other labels after this label, 0 means yes, 1 means no. Answer: AC Download Passcert Latest & Valid H12-222_V2.5 Free Dumps To Ensure Your Success

  11. 10. For a device running MPLS, there will be a label forwarding table. Which of the following statements about the entry of labels in the label forwarding table is correct? A. Different EFC's incoming tags must be different B. The incoming tags of different EFCs must be the same C. The incoming tags of different EFCs may be the same Answer: C Download Passcert Latest & Valid H12-222_V2.5 Free Dumps To Ensure Your Success

More Related