1 / 11

VCP-NV 2020 2V0-41.20 Dumps

Passcert new released VCP-NV 2020 2V0-41.20 Dumps which can not only give you a good exam preparation to allow you pass your exam, but also provide you with one-year free update service.

carrorsstephen
Télécharger la présentation

VCP-NV 2020 2V0-41.20 Dumps

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 2V0-41.20 Dumps 2V0-41.20 Dumps Professional VMware NSX-T Data Professional VMware NSX-T Data Center Center https://www.passcert.com/ https://www.passcert.com/2V0-41.20 2V0-41.20.html .html

  2. Download Passcert valid 2V0-41.20 exam dumps to pass your 2V0-41.20 exam successfully Question 1 An NSX administrator noticed that the nsxclicommand times out after 600 secs of idle time. An NSX administrator noticed that the nsxclicommand times out after 600 secs of idle time. Which CLI command disables the nsxcli time out value on NSX Manager? Which CLI command disables the nsxcli time out value on NSX Manager? A. set cli-timeout 0 A. set cli-timeout 0 B. set cli-timeout enabled B. set cli-timeout enabled C. set cli-timeout disabled C. set cli-timeout disabled D. set cli-timeout 1 D. set cli-timeout 1 Answer: A Answer: A 2

  3. Download Passcert valid 2V0-41.20 exam dumps to pass your 2V0-41.20 exam successfully Question 2 An NSX administrator is configuring the KVM hypervisor host as a transport node and wants to apply the An NSX administrator is configuring the KVM hypervisor host as a transport node and wants to apply the Failover Order as a NIC teaming policy. Failover Order as a NIC teaming policy. Which profile allows the administrator to configure the NIC Teaming policy as Failover Order? Which profile allows the administrator to configure the NIC Teaming policy as Failover Order? A. N-VDS/VDS Profile A. N-VDS/VDS Profile B. Transport Node Profile B. Transport Node Profile C. Host Switch Profile C. Host Switch Profile D. Uplink Profile D. Uplink Profile Answer: D Answer: D 3

  4. Download Passcert valid 2V0-41.20 exam dumps to pass your 2V0-41.20 exam successfully Question 3 Which two choices are prerequisites to configure NSX-T on VDS? (Choose two.) Which two choices are prerequisites to configure NSX-T on VDS? (Choose two.) A. MTU 1500 A. MTU 1500 B. MTU 1400 B. MTU 1400 C. vSphere Distributed Switch 6.5 C. vSphere Distributed Switch 6.5 D. vSphere Distributed Switch 7.0 D. vSphere Distributed Switch 7.0 E. MTU 1600 E. MTU 1600 Answer: DE Answer: DE 4

  5. Download Passcert valid 2V0-41.20 exam dumps to pass your 2V0-41.20 exam successfully Question 4 Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node? metal transport node? A. ifconfig A. ifconfig B. tcpdump B. tcpdump C. debug C. debug D. ipconfig D. ipconfig Answer: A Answer: A 5

  6. Download Passcert valid 2V0-41.20 exam dumps to pass your 2V0-41.20 exam successfully Question 5 Which three steps are required to create an IPsec VPN tunnel? (Choose three.) Which three steps are required to create an IPsec VPN tunnel? (Choose three.) A. Create an IPsec service. A. Create an IPsec service. B. Add a local endpoint. B. Add a local endpoint. C. Configure an IPsec session. C. Configure an IPsec session. D. Configure a distributed firewall policy. D. Configure a distributed firewall policy. E. Add a logical switch. E. Add a logical switch. Answer: ABC Answer: ABC 6

  7. Download Passcert valid 2V0-41.20 exam dumps to pass your 2V0-41.20 exam successfully Question 6 An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing. An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing. Which failover detection protocol must be used to meet this requirement? Which failover detection protocol must be used to meet this requirement? A. Beacon Probing (BP) A. Beacon Probing (BP) B. Host Standby Router Protocol (HSRP) B. Host Standby Router Protocol (HSRP) C. Bidirectional Forwarding Detection (BFD) C. Bidirectional Forwarding Detection (BFD) D. Virtual Router Redundancy Protocol (VRRP) D. Virtual Router Redundancy Protocol (VRRP) Answer: C Answer: C 7

  8. Download Passcert valid 2V0-41.20 exam dumps to pass your 2V0-41.20 exam successfully Question 7 What are two supported N-VDS modes? (Choose two.) What are two supported N-VDS modes? (Choose two.) A. DPDK Datapath A. DPDK Datapath B. Overlay Datapath B. Overlay Datapath C. Secure Datapath C. Secure Datapath D. Enhanced Datapath D. Enhanced Datapath E. Standard Datapath E. Standard Datapath Answer: DE Answer: DE 8

  9. Download Passcert valid 2V0-41.20 exam dumps to pass your 2V0-41.20 exam successfully Question 8 A user is assigned these two roles in NSX Manager: A user is assigned these two roles in NSX Manager: - LB Admin - LB Admin - Network Engineer - Network Engineer What privileges does this user have in the system? What privileges does this user have in the system? A. read permissions on all networking services and full access permissions on load balancing features A. read permissions on all networking services and full access permissions on load balancing features B. full access permissions on all networking services and full access permissions on load balancing features B. full access permissions on all networking services and full access permissions on load balancing features C. full access permissions on all networking services and read permissions on load balancing features C. full access permissions on all networking services and read permissions on load balancing features D. read permissions on all networking services and read permissions on load balancing features D. read permissions on all networking services and read permissions on load balancing features Answer: B Answer: B 9

  10. Download Passcert valid 2V0-41.20 exam dumps to pass your 2V0-41.20 exam successfully Question 9 An NSX administrator has configured a KVM hypervisor as a transport node. An NSX administrator has configured a KVM hypervisor as a transport node. Which kernel module on KVM implements a N-VDS? Which kernel module on KVM implements a N-VDS? A. openvswitch A. openvswitch B. etherswitch B. etherswitch C. nsx-vswitch C. nsx-vswitch D. dyswitch D. dyswitch Answer: A Answer: A 10

  11. What To Get? What To Get? ü 100% Real Exam Questions 100% Real Exam Questions ü One Year Free Update One Year Free Update ü Money Back Guarantee Money Back Guarantee ü Free Software Free Software ü Free Demo Download Free Demo Download 11

More Related