1 / 9

PERTEMUAN 14

PERTEMUAN 14. PENGUKURAN ENERGI. Measurement of Energy. Energy is measured by means of the energy meter (watt-hour-meter) Energy meter is an integrating instrument and takes into account both of the quantities Three types of energy meter : Electrolytic meters Motor meters Clock meters.

cassandra-gilbert
Télécharger la présentation

PERTEMUAN 14

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PERTEMUAN 14 PENGUKURAN ENERGI

  2. Measurement of Energy • Energy is measured by means of the energy meter (watt-hour-meter) • Energy meter is an integrating instrument and takes into account both of the quantities • Three types of energy meter : • Electrolytic meters • Motor meters • Clock meters

  3. Electrolytic Meters • Operates on the principle of electrolytic action and is purely a dc meter measuring ampere-hour • Used for measurement of energy when the supply voltage is constant • Advantages : • They are accurate even at very small loads • They are unaffected by stray magnetic fields • They are free from friction loads • Disadvantages : • There is a potential drop across their terminals • They require frequent inspection • The destruction of the old record of energy on re-set • It is not taking account the variations of circuit voltage

  4. Reason Electrolytic Meters • It is generally used on d.c. supply systems • The range of the meter is extended by providing it with shunt • No appreciable error is introduced at low loads due to any departure from the correct division of current between meter ans shunt

  5. Types of Motor Meters • Principle : small motor of d.c. or a.c. type whose instantaneous speed of rotation is proportional to the circuit current • Essential parts : • Operating torque system • Braking device • A device for registering the number of revolutions made by rotating elements • Mechanical construction : must be such that the functioning of the meter is not readily interfered with by tilting or any external means. • Errors in motor meters : friction errors and braking errors • With the increase in temperature, the resistance of eddy current path will increase and therefore the braking torque will decrease

  6. Mercury Motor Meters • Ferranti mercury motor meter - • It is the most common used and best form of mercury ampere hour meter • Illustration of principle of Ferranti D.C. A-H meter ------------------- • There is a lack of strict proportionality between the flux in the magnet and the voltage creating it

  7. Commutator Motor Meters • It is essentially small d.c. motor with a wound armature • Advantages : • Simple construction • Small voltage drop across the meter • The considerably large current carrying capacity without use of shunt • Small starting friction owing to the very small pressure on the bearings

  8. Motor Meters for A.C. Circuits • The most commonly used meter is the induction type watthour meter • Advantage : higher torque/weight ratio and the absence of commutator -- more accurate than the commutator type on the light loads • Principle of operation : exactly the same as that of induction type wattmeter • The construction is also the same except that the spring control and pointer od wattmeter are replaced by a brake magnet

  9. Induction Type Single Phase Watt-hour Meters • Errors and adjustments : • Phase and speed errors : bringing the shading band nearer to the disc, adjustment of the position of the brake magnet • Friction compensation : variation of the positions of the bands • Temperature and frequency errors: They can be adjusted to have a minimum error at declared supply frequency

More Related