1 / 23

Target mainly by T. Nakadaira, Y. Hayato, A.K.Ichikawa

Target mainly by T. Nakadaira, Y. Hayato, A.K.Ichikawa. Here, I will report about the present status on target R&D. Current main member around target. Construction group leader T. Kobayashi Convener of target and horn system : A.K.Ichikawa Convener of target station : Y. Yamada

cathleen-hall
Télécharger la présentation

Target mainly by T. Nakadaira, Y. Hayato, A.K.Ichikawa

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Target mainly by T. Nakadaira, Y. Hayato, A.K.Ichikawa Here, I will report about the present status on target R&D.

  2. Current main member around target Construction group leader T. Kobayashi Convener of target and horn system : A.K.Ichikawa Convener of target station : Y. Yamada Target design : T. Nakadaira et. al Target FEM calculation : Y. Hayato et. al Radiation damage study : Y. Hayato et. al • International collaboration • Horn, especially on 2nd horn with E.Zimmerman and L.Bartoszek • Target : start discussion with RAL

  3. Thermal Stress cal. w/ MARS Temperature rise of the target due to the radiation J/gK degree w/ 1 pulse R Z 2.6MJ in 5ms Aluminum cannot withstand. Only low-Z material such as graphite or beryllium. Thermal stress 6.8 MPa (safety factor ~3 against fatigue strength)

  4. Water cooling Water Temp. 25oC Heat transfer rate 5kW/m2K confirmed by cooling test Flow rate 20 l/min

  5. Case (container) Gap Target (Graphite) Effect of irradiation IG-110 @400oC 2dpa -> -0.5% @ J-PARC n 0.26dpa/year

  6. Effect of irradiation on graphite • Damage by neutron irradiation • 0.25dpa@200oC… Change of dimension +0.14% • Thermal conductivity -98% • 0.13dpa@300oC… … Change of dimension -0.01% • Thermal conductivity -75%

  7. Coaxial cooling pipe : Ti or Graphite

  8. Time evolution of temperature(assuming specific heat at constant pressure) Condition (example) a~600W/m2K @~1atm. flow velocity 170m/s 25℃ 380℃ ~80℃ 660℃ ~430℃ ~620℃ 780℃

  9. Prototype design of Target system • Prototype design for He cooling pipe is in progress. Exit of He Entrance of He Graphite Cap graphite Target Outer Pipe t=0.3mm Ti-6Al-4V Inner Pipe t=2.0mm Graphite or t=0.3mm Ti (Ti-6Al-4V)

  10. baffle

  11. Temperature rise with nominal beam • 理想的なバッフル • ターゲット外径=バッフル内径 • 水冷の場合 配管Al 0.8mm

  12. Temperature rise with mis-directed beam

  13. Baffle –other possibility-

  14. vertical alignment rods xy-stage frame B (vertical motion) frame A (fixed) frame C (horizontal motion) One of the Concept of Horn support Adjusting bolt Rod for position measurement Adjusting bolt by S.Koike

  15. Another Concept of Horn support ~1.5mくらいか ~4m 支持基準 ~1m 支持基準を100mmで調整できれば、 ~1mmは達成できる？

  16. Other R&D items -Remote Maintenance- Top View Side View Disconnect Horn and it’s support structure including strip-lines. Is this realistic? Residual radiation level should be checked. Anyway, we need remotely connectable/dis-connectable cuppling For strip-lines and water pipes.

  17. comments The target is a critical part of the project and the relation to the 1st horn is rather complicated. I feel that careful discussion is necessary before the real collaboration on the target to make clear situation.

  18. Supplement

  19. Target Nu-TAC以後の進展 • Graphiteの熱応力の再評価 (S. Ueda) • 比熱の温度依存性のupdate & bug fix • 安全率３　は満たされている。 • 東洋炭素 ISO-88についても安全率を評価

  20. 内側配管の温度勾配/応力分布 横軸: 0=最内面 1=最外面 • Al合金(0.8mm厚),Ti合金 (0.3mm厚) ~200℃ 円周方向応力 <２ＭPa 動径方向応力 <10kPa 安全率 等価応力<３ＭPa 軸方向応力 <４ＭPa

  21. Ｈｅ冷却管のプロトタイプの設計 • Heの流量、除熱能力を試験したい。 • KEKB/Belleの衝突点チェンバー冷却用のHeシステムを使ったテストの検討中。 • 最大ゲージ圧0.1MPa, He流量400 [l/min] • カウンターホールへの移設可 • 電源: 200V15A • 冷却水 10-50[l/min] • 冷却配管を設計中 • 絶縁材の材質を検討中

More Related