1 / 18

for “J” FORM PKG (SOJ, PLCC, ETC.) GULL FORM PKG (QFP, SOP, ETC.) 90° FORM PKG (DIP, SIP)

◀ TRIM/FORM/SINGULATION SYSTEM ▶. for “J” FORM PKG (SOJ, PLCC, ETC.) GULL FORM PKG (QFP, SOP, ETC.) 90° FORM PKG (DIP, SIP). INDEX. General Structure of Servo CAM of System 1.1 Comparison Table of CAM Structure 1.2 Layout of Micron CAM Structure

cato
Télécharger la présentation

for “J” FORM PKG (SOJ, PLCC, ETC.) GULL FORM PKG (QFP, SOP, ETC.) 90° FORM PKG (DIP, SIP)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ◀ TRIM/FORM/SINGULATION SYSTEM ▶ for “J” FORM PKG (SOJ, PLCC, ETC.) GULL FORM PKG (QFP, SOP, ETC.) 90° FORM PKG (DIP, SIP)

  2. INDEX • General Structure of Servo CAM of System • 1.1 Comparison Table of CAM Structure • 1.2 Layout of Micron CAM Structure • Mechanical D/T/F/S System for “J” Form PKG (PLCC32) • 2.1 Specification & Configuration for Trim System • 2.2 Top View of System • 2.3 Front View of System • 2.4 Specification & Configuration for Form/Sing System • 2.5 Top View of System • 2.6 Front View of System • 2.7 Side View of System

  3. INDEX • 3 Mechanical D/T/F/S System for “Gull” Form PKG (QFP100L-14X20) • 3.1 Specification & Configuration for Trim System • 3.2 Top View of System • 3.3 Front View of System • 3.4 Specification & Configuration for Form/Sing System • 3.5 Top View of System • 3.6 Front View of System • 3.7 Side View of System • Mechanical D/T/F/S System for “90 ” Form PKG (SK-DIP24) • 4.1 Specification & Configuration of System • 4.2 Top View of System • 4.3 Front View of System

  4. Crank Shaft (Split Type) Index CAM Floater CAM Main Servo Motor for Tool up/down & Index/Floater CAM Operation Speed Reducer Connecting Rod Sub-Servo Motor for Tool Open Height Control during Jamming, Maintenance,Rework Air Cushion

  5. Index Rotary Index Unit Orientation, Device Check Vision On-Loading Off-Loading Belt Loading Floater Tool (Degate,Dejunk, Debar)

  6. Orientation, Device Check Floater & Index Vision Monitor Touch Screen Vision Tool Rotary Type Pick & Place Multi Magazine Stock Multi Magazine Stock MGZ Elevator 2 Units MGZ Elevator 2 Units Scrap Hood CAM Servo Motor

  7. Index Rotary Index Rotary Index Unit Vision Magazine On-Loading Sing Tool (2up) Unit Counter Chute Belt Loading Form Tool (1up) Floater Index Buffer Rail Tube Off-Loading

  8. Vision Monitor Index Buffer Sub-Rail Touch Screen Vision Rotary Type Pick & Place Form Tool Singulation Tool Lead Frame Flip-Over CAM Servo Motor for Singulation Multi MGZ Stock Scrap Hood MGZ Elevator 2 Units Main CAM Servo Motor

  9. Unit Counter Chute Air Blow Main Servo Motor Tube Stock & Auto Tube Change Floater CAM Index CAM

  10. Transfer Pick & Place (1) Orientation, Reverse L/F, Device Check Transfer Pick & Place (2) Buffer Pick&Place for L/F Vision Sing. Tool (2up) Tray Offloader Form Tool Trim Tool L/F MGZ Onloader Tray Onloader Tray Transfer P&P

  11. Tray Onloading Orientation, Reverse L/F, Device Check Monitor Vision Tray Offloading Pick & Place Mgz Carrier Type Onloading Synchronized CAM

  12. L/F Scrap Discharge Air Blower & Unit Counter Tube Off Loading Index CAM Index Tube Stock L/F P&P MGZ Transfer Orientation, Reverse L/F, Device Check Sensor 24 SKDIP T/F/S System

  13. Orientation, Reverse L/F, Device Check L/F Scrap Discharge Master Die with Tool L/F P&P Monitor Air Blower & Unit Counter Main Servo Motor Tube Stock Mgz Loader Press Guide Post Mgz Elevator Sub-Servo Motor Scrap Hood 24 SKDIP T/F/S System

More Related