1 / 6

CIEMAT contribution to PETS

CIEMAT contribution to PETS. David Carrillo. CTF3 Collaboration Meeting January 2007. EXTRACTOR. PETS. Matching Section. Reflection and transmission. Wakefields. Reflection of decelerating mode. PETS: 30 GHz design. 72º phase advance per cell 15 mm aperture PETS

ceceliav
Télécharger la présentation

CIEMAT contribution to PETS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CIEMAT contribution toPETS David Carrillo CTF3 Collaboration Meeting January 2007

  2. EXTRACTOR PETS Matching Section Reflection and transmission Wakefields Reflection of decelerating mode PETS: 30 GHz design 72º phase advance per cell 15 mm aperture PETS Damping of dangerous modes Number of cells not to scale

  3. by courtesy of Mauro Taborelli. CERN 400 mm long PETS • 2 octants of PETS were ordered to two Spanish firms, only one was successful. • Critical zones: undulated profile and fillet radius • EDM used to create sinusoidal profile • Profile shifted but good (shift produced by a first milling process of the flat surfaces in a non controlled-temperature environment) • Roughness 0.8um > specifications (0.2um)

  4. 400 mm long PETS • Milling was used for fillet radius, but it wasn’t well done on the valleys: there were problems with positioning and with CAD/CAM machine system Pictures by courtesy of Mauro Taborelli. CERN

  5. By courtesy J. Gomez, Vacuum Projects Next pieces • One piece of 40 mm long has been made by a different company. Completely produced by milling. • This piece is being measured at CERN at the moment. Preliminary results show inaccuracy on the top and the bottom of valleys. Company used a conventional milling machine with a multiplier (error due to vibrations). • Same piece has been ordered to the company which produced the best 400mm PETS. • For this piece, high speed milling machine will be used (14000rpm)

  6. CONCLUSIONS • A 30 GHz PETS design was realized • Structure optimized for decelerating mode • Good extraction of power • Damping of dangerous modes • Two 400 mm octants were machined with EDM + milling • Roughness specification of 0.2um was not achieved (0.8um) • Profile of undulation was accurate • One 40 mm octant was machined with conventional milling • One 40 mm octant will be machined with high speed milling • We are confident in achieving accurate profile and roughness • If so, an octant of 400 mm will be the next step • Latest news (12GHz) • Tolerances now are relaxed, so the profile of the new design it seems easier to machine… but it must be studied.

More Related