1 / 1

Conversion of olive tree pruning in fluidized bed: Experiments and gasifier modeling

Conversion of olive tree pruning in fluidized bed: Experiments and gasifier modeling. Susanna Nilsson 1 , Alberto Gómez-Barea 1 , Manuel Campoy 1 , Guadalupe Pinna 2 , Manuel Antonio Silva Perez 2 , Pedro Ollero 1 1 Chemical and Environmental Engineering Department.

cedric-reilly
Télécharger la présentation

Conversion of olive tree pruning in fluidized bed: Experiments and gasifier modeling

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Conversion of olive tree pruning in fluidized bed: Experiments and gasifier modeling Susanna Nilsson1, Alberto Gómez-Barea1, Manuel Campoy1, Guadalupe Pinna2, Manuel Antonio Silva Perez2, Pedro Ollero1 1Chemical and Environmental Engineering Department. Escuela Superior de Ingenieros (University of Seville) Camino de los Descubrimientos S/N. 41092,Seville (Spain) 2 Foundation Advanced Technological Centre for Renewable Energy (CTAER) Paraje los Retamares S/N. 04200, Tabernas -Almería (Spain) Objective The aim of this work is to assess the performance of a fluidized bed gasifier (FBG) using olive tree pruning (OTP) as fuel by: • Devolatilization and char gasification experiments carried out in a laboratory fluidized bed (FB) • Modeling of a FBG operating with OTP as fuel Experimental conditions • Fluidizing gas • Devolatilization: 100% N2 • CO2 gasification: N2-CO2 mixtures with varying CO2 concentration • H2O gasification: N2-H2O–H2 mixtures with varying H2O and H2 concentration • Temperature: 750-900 ºC • Atmospheric pressure • Bed material: Bauxite, 250-500 µm • Particle size: 1-20 mm Devolatilization results Light gas composition: Product yields: Particle size variation: Model description Submodels: Model structure: Model input: • Fuel composition: proximate and elemental analysis and HHV • Gasifier geometry: diameter and height of the bed and freeboard • Fuel feed rate • Air flow rate • Devolatilization yields as a function of temperature • Char gasification kinetics • Fluid dynamics • Dense bed zone • Freeboard zone • Particle attrition and fragmentation • Char conversion Model results Optimal operating temperature: Conclusions: The influence of the following parameters has been studied: • Equivalence ratio (the gasifier is assumed autothermal) • Preheating of the fluidizing gas • Composition of the fluidizing gas • Fuel ash content • Fuel moisture content • Fuel HHV • Optimal operating temperature is close to 900 ºC • The composition of the fuel is very important: small variations of the moisture content, ash content or HHV influence significantly the gasification efficiency and gas quality. • The char conversion is mainly influenced by the gasification temperature, being the gas composition a secondary factor Cold gas efficiency ,% Temperature, ºC

More Related