1 / 51

HMT Bulk Loading/Unloading

HMT Bulk Loading/Unloading. Introduction. If you load or unload hazardous materials in bulk containers, it is your responsibility to follow the correct procedures. Incidents involving hazardous materials can lead to serious injury, property and environmental damage, and even death. Introduction.

charlottebrown
Télécharger la présentation

HMT Bulk Loading/Unloading

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. HMTBulk Loading/Unloading

  2. Introduction If you load or unload hazardous materials in bulk containers, it is your responsibility to follow the correct procedures. Incidents involving hazardous materials can lead to serious injury, property and environmental damage, and even death.

  3. Introduction Department of Transportation statistics show that 97 percent of all hazardous material incidents involve tank cars and tank trucks. And surveys show that up to 50 percent of all vehicles are placarded incorrectly.

  4. Identifications & Markings Bulk Packaging is packaging other than a vessel or barge that hazardous materials are loaded onto which has a maximum capacity greater than 119 gallons, has a maximum net mass greater than 882 pounds, or has a water capacity greater than 1,000 pounds.

  5. Identifications & Markings This includes railroad tank cars, tank trucks, and portable tanks that meet the criteria just mentioned. All bulk containers must have the correct placards and markings according to the requirements in Title 49 of the Code of Federal Regulations.

  6. Identifications & Markings Railroad Tank Cars Proper Shipping Name Reporting Marks Tank Car Classification Safety Valve & Tank Test Information DOT Hazard Warning Placarding

  7. Identifications & Markings Tank Trucks Shipper’s Name and Location DOT Hazard Warning Placarding UN or NA Identification Number

  8. Identifications & Markings Railroad tank cars can be divided into two groups: Pressurized Tank Cars General Purpose Tank Cars

  9. Identifications & Markings A general purpose or non-pressurized tank car is cylindrical in shape with convex (curves or bulges outward) heads.

  10. Identifications & Markings Loading devices and equipment are found in the platform area on the top of the tank car.

  11. Identifications & Markings In addition, bottom outlet valves for unloading are at the center of the car, and heater coil outlets sometimes protrude from underneath the tank.

  12. Identifications & Markings Pressure tank cars are also cylindrically shaped with convex heads. Pressurized tank cars are always loaded from the top. The loading devices and fittings are located in one housing on the top center of the tank cars.

  13. Loading & Unloading As a person who loads and unloads bulk shipments of hazardous material, there are two reasons why it is important that you follow the proper procedures and safeguards:

  14. Loading & Unloading 1. To ensure your safety and health. 2. To reduce the odds of a release occurring during transport.

  15. Loading & Unloading It is also important that you are familiar with the material you work with.

  16. Loading & Unloading Though Material Safety Data Sheets do not necessarily provide specific DOT information, they are a valuable source for finding out the physical characteristics and hazards of a material, the recommended Personal Protective Equipment to be worn, and other safety precautions.

  17. Loading & Unloading There are specific requirements that must be followed when loading and unloading tank trucks or portable tanks into or onto trucks.

  18. Loading & Unloading When loading or unloading a bulk package on a truck, whether the tank is portable or cargo, the vehicle’s engine must be shut off, the parking brake set, and the wheels chocked.

  19. Loading & Unloading Because of the possible buildup of static electricity, the vehicle must also be grounded.

  20. Loading & Unloading The responsible person must verify that the driver understands the potential hazards of the material, is wearing the proper Personal Protective Equipment, and knows the proper procedures to follow in case of an emergency.

  21. Loading & Unloading The driver must have a clear view of the vehicle and remain within 25 feet of the truck during the loading or unloading process.

  22. Loading & Unloading Before loading or unloading, the person performing the function must inspect the tank to make sure all fittings, valves, and safety relief devices are in proper condition for safe transportation.

  23. Loading & Unloading Loading and unloading both pressure and general purpose tank cars requires the same thorough checklist as tank trucks. Before the process begins, blue flags are positioned with one of the two following warnings:

  24. Loading & Unloading STOP, TANK CAR CONNECTED or STOP, MEN AT WORK

  25. Loading & Unloading The wheels are then chocked, and the hand brake is set.

  26. Loading & Unloading Because of the potential for static electricity buildup, the tank car is grounded.

  27. Loading & Unloading On general purpose tank cars equipped with secondary outlet valves, the plugs must be removed, and the top and bottom valves opened during loading. Internal heating coil caps must also be removed during loading.

  28. Loading & Unloading If loading, check the tank car’s interior for cleanliness, and to verify that the previous contents are compatible with the material being loaded.

  29. Loading & Unloading Make sure all valves and fittings are in their proper setting, and all loading or unloading connections are properly attached. If corrective actions are needed to the tank car before loading or unloading, notify the switching office or terminal manager.

  30. Loading & Unloading After loading and before shipment or unloading and release, disconnect the appropriate lines or hoses. If loading, check to make sure the required outage has been left to allow for expansion, or that the tank is empty if you have been unloading.

  31. Loading & Unloading Make sure you properly seal the dome cover and uniformly cross-tighten all securing nuts. All valves must also be securely closed.

  32. Loading & Unloading Check to be sure that all valve caps and plugs are in place and have been tightened with a wrench. All protective housings and covers must also be in place, closed, and wrench tight.

  33. Loading & Unloading On general purpose tank cars, make sure the bottom outlet valve gasket is in good condition. Tighten the bottom outlet valve cap with a wrench that has a minimum 36-inch handle.

  34. Loading & Unloading The plug in the bottom outlet valve should be wrench tight. Make sure all secondary outlet valves and plugs are tight.

  35. Loading & Unloading Check the tank car for any signs of leakage or spills, and make sure the correct placards are in place.

  36. Loading & Unloading If loading, check the marks to see that the load limit has not been exceeded and the OSHA hazard warning is in place.

  37. Loading & Unloading The person loading or unloading must be able to rapidly halt cargo transfer during the process if the material is hazardous.

  38. Placarding After all final checks, once the tank cars, portable tanks, and tank trucks have been loaded or unloaded, but before their shipment, they must be placarded according to 49 CFR Part 172.504.

  39. Placarding Placards inform emergency response personnel of the hazard class and associated dangers of the material being transported.

  40. Placarding The regulations require specific placards for each of the nine hazard classes, as well as specific placards for those hazard classes that are further separated into divisions.

  41. Placarding Most bulk transport containers require four placards, one on each side and each end.

  42. Placarding As a general rule of thumb, placards must be visible on all four sides of a bulk packaging and at least three inches away from any other markings.

  43. Placarding If a portable container holds more than 119 gallons, but less than 1,000 gallons, the tank may be placarded on two opposite ends.

  44. Placarding Sometimes a material will have a primary and a secondary, or subsidiary, hazard. In these cases, placards showing both hazards must be displayed, but the secondary hazard class placard must have the hazard class number removed or obliterated.

  45. Summary Loading and unloading hazardous materials is a serious responsibility. Be familiar with and respect the hazards associated with the material you load or unload.

  46. Summary Follow all procedures and safe work practices, including proper selection of tools and Personal Protective Equipment.

  47. Summary Make sure you double check that all valves, fittings, caps, seals, and closures are properly secured, whether you used them or not.

  48. Summary Check the placards before releasing the bulk container.

  49. Summary Knowing and following the proper procedures can ensure safe transportation of bulk shipments.

More Related