1 / 10

PUSK

Our project integrates a camera into a CUBESAT structure, designed to take pictures every 4 minutes, allowing for the observation of Earth's curvature. This passive system eliminates potential failures and runs automatically after launch on April 21. We will be capturing images at increasing altitudes, developing the film to reveal the curvature clearly. The estimated total cost for the project materials is $157.58, ensuring an affordable and efficient design for space exploration.

chesna
Télécharger la présentation

PUSK

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PUSK Blair Harness Donna Hodgson Mark Gurevich Sara Lewandowski Connor Lowrey Steve Nauman Steven Pfan John Qiu

  2. BASIC DESIGN *Integrate a camera into a CUBESAT structure and take pictures every 4 minutes, observing the curvature of the Earth 555 Timing Circuit *Structure Insulation-Foam core Aluminum Siding

  3. 555 CIRCUIT DESIGN

  4. CUBESAT/ EOSS Flight Interface Specifications

  5. Schematic Front View

  6. Schematic Side View

  7. Schematic Top/Bottom View

  8. SYSTEM OPERATION * This system is designed to be extremely passive * This will eliminate possibilities for failure or problems * After launch on April 21, our CUBESAT will run automatically until recovery * After developing our film, we hope to be able to clearly observe the curvature of the Earth taken by our camera at a timed interval at increasing altitude

  9. FINAL COSTS * Aluminum screws...$2.49 * Slide rule...$2.59 * Aluminum angle...$2.49 * Aluminum sheets...$6.55 * 555 timer...$0.62 * Pushbutton switch...$1.69 * Batteries...$7.88 * Cannon Elph LT...$59.99 * Lithium Battery...$7.99 * Kodak Film (40 exposures)...$16.78 Total Expenditures to date: $157.58

  10. QUESTIONS ? ? ?

More Related