1 / 18

Creative Inventions and Robotics build-it-yourself

Tug Boat Project. Creative Inventions and Robotics www.build-it-yourself.com. “Big Bud the Tug”. Need to haul a load of ‘Premium Quality Junk’ to another land? “Big Bud” can do the job. www.build-it-yourself.com. Tug Boat Engine Room.

chul
Télécharger la présentation

Creative Inventions and Robotics build-it-yourself

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Tug Boat Project Creative Inventions and Robotics www.build-it-yourself.com

  2. “Big Bud the Tug” Need to haul a load of ‘Premium Quality Junk’ to another land? “Big Bud” can do the job. www.build-it-yourself.com

  3. Tug Boat Engine Room Mount the Power Top Gear Train and an RCX on two 15 hole beams. www.build-it-yourself.com

  4. Tug Boat Cabin The walls will be 2.5” tall. Measure and mark with a pencil three 2.5” cardboard strips. 2.5” 8.5” 2.5” www.build-it-yourself.com

  5. Tug Boat Cabin Cut out the three cardboard strips. 2.5” www.build-it-yourself.com

  6. Tug Boat Cabin Measure 5.5” on two strips. You Know what to do on the third strip. 2.0” 2.5” 5.5” 2.0” www.build-it-yourself.com

  7. Tug Boat Cabin Cut out the two 5.5” x 2.5” strips. These will be the two cabin sides. Cut out the 6.5” strip. This will be the front of the main cabin. 2.5” 5.5” www.build-it-yourself.com

  8. Tug Boat Cabin Decorate the sides and front. Use blue, red and yellow pencils to shade the wood panels. Then outline the wood panels with a black pen. Left side Front Right side Cut out windows and doors. Then paste them on. www.build-it-yourself.com

  9. Tug Boat Cabin When all sides are decorated, then you can tape them together. www.build-it-yourself.com

  10. Tug Boat Cabin Wrap the sides around the engine room. Glue Popsicle sticks on top to make the structure strong. You can tape the sides to the base It’s best not to put a back wall on so you can easily get to the RCX on/off buttons. www.build-it-yourself.com

  11. Tug Boat Cabin Cut a cabin roof. Then punch a hole through the roof with a pencil so the gear train shaft sticks out. www.build-it-yourself.com

  12. Captain’s Cabin Cut out a 3” diameter circle or use 3” circular container lid. Build the captain’s steering wheel and glue it to the circle. www.build-it-yourself.com

  13. Captain’s Cabin Cut out a 1.5” x 6” strip of cardboard and draw wood panels on it like you did for the main cabin. Then tape coffee stirrer sticks on the back. 6” 1.5” Front Back www.build-it-yourself.com

  14. Captain’s Cabin Bend the sides carefully until they fit around the circle. You can tape the sides to the circle on the outside and the inside. www.build-it-yourself.com

  15. Captain’s Cabin Make the roof a little bigger than the Captain’s cabin. www.build-it-yourself.com

  16. Tug Boat Cabins Glue the Captain’s Cabin on top of the Main Cabin. www.build-it-yourself.com

  17. Tug Boat Sides Cut and sculpt a 1” x 1” strip of foam rubber for the sides of the tug. www.build-it-yourself.com

  18. Tug Boat Sides Glue the other side on. Now you’re ready to add some decorations! www.build-it-yourself.com

More Related