1 / 8

Stability of the longitudinal coherent modes

Stability of the longitudinal coherent modes. General stability criterion Application to the LHC at top energy. General stability criterion (1/6). Stationary distribution. Synchronous phase shift. Potential well distortion. Perturbation (around the new fixed point). Dispersion relation.

cid
Télécharger la présentation

Stability of the longitudinal coherent modes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Stability of the longitudinalcoherent modes • General stability criterion • Application to the LHC at top energy

  2. General stability criterion (1/6) • Stationary distribution • Synchronous phase shift • Potential well distortion • Perturbation (around the new fixed point) • Dispersion relation Sacherer formula Dispersion integral

  3. General stability criterion (2/6) • Distribution of the normalised synchrotron amplitudes • Stability diagram

  4. General stability criterion (3/6) • The stability boundary can be approximated by semicircles (following the example of Keil-Schnell for coasting beams) Sacherer stability criterion is the approximated full spread between centre and edge of the bunch on a flat-top

  5. General stability criterion (4/6) At low intensity and neglecting synchrotron frequency spread • Dipole mode is the incoherent small-amplitude frequency shift • Quadrupole mode

  6. General stability criterion (5/6) • Stability of the dipole mode Stability criterion discussed during the last LCE meeting  with

  7. General stability criterion (6/6)  with

  8. Application to the LHC at top energy • The previous stability criterion is the same as the one used by Boussard-Brandt-Vos in the paper “Is a longitudinal feedback system required for LHC?” (1999), with • Numerical application with the same parameters as the ones used in the above paper (0.28  for 00 and 11, …) Value found by BBV with

More Related