1 / 11

DELL EMC PowerEdge DES-4122 Dumps

Passcert team will get the latest DELL EMC PowerEdge DES-4122 Dumps with verified questions and answers to help you study the latest content and pass your exam successfully.

cindertan
Télécharger la présentation

DELL EMC PowerEdge DES-4122 Dumps

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DES-4122 Free Dumps Specialist - Implementation Engineer PowerEdge Version 2.0 https://www.passcert.com/DES-4122.html

  2. 1. A technician is creating a virtual disk in the iDRAC (2x 4 TB NL-SAS in RAID 1) to install Windows 2016 They manually boot to the OS installation media without using the Lifecycle Controller OS Deployment wizard Only the first 2048 GB on the virtual disk can be partitioned How should the technician obtain access to the remaining 2 TB (approximately) of storage? A. Use the Lifecycle Controller OS Deployment Wizard to deploy the OS on this server B. Delete the 4 TB virtual disk and create a virtual (boot) disk no larger than 2048 GB C. Upgrade to a newer version of the operating system D. Use F2 to go into the BIOS, change the BIOS boot mode to UEFI, and try again Answer: C Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success

  3. 2. Where is the data stored to allow Easy Restore to successfully complete a system board replacement? A. NAND Flash module on the disk drive mid plane B. IDSDM SD card C. vFlash SD card D. Serial Flash storage in the server's front panel Answer: C Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success

  4. 3. A technician needs to repurpose a Dell EMC PowerEdge server. The server has dual processors with 18 cores each The OS only "sees" 24 threads in total. Which setting should the technician change in Processor Settings in the System BIOS? A. System Profile B. Virtualization Technology C. HyperThreading D. Number of Cores per Processor Answer: A Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success

  5. 4. What are the default settings used when applying firmware and a configuration to a replaced part using the Lifecycle Controller? A. Firmware: Upgrade to latest available version Configuration Apply always B. Firmware Allow version upgrade only Configuration: Disabled C. Firmware: Match firmware of replaced part Configuration Apply always D. Firmware Disabled Configuration Apply only if firmware match Answer: C Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success

  6. 5. What is the purpose of the Silicon-Based Hardware Root of Trust feature in Dell EMC PowerEdge 14G servers? A. Ensures that the installed operating system is authentic B. Ensures that the server has a valid Service Tag number C. Ensures that no unauthorized BIOS or firmware codes are run D. Ensures that the server boots only when connected to a verified network Answer: C Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success

  7. 6. What is a systems management console solution optimized for monitoring and managing Dell enterprise and remote office hardware? A. SupportAssist Enterprise B. iSM C. OpenManage Essentials D. iDRAC9 Answer: C Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success

  8. 7. After completing a disk rebuild operation, a technician needs to configure the system so that the rebuild process happens faster the expense of slowing users down. Which setting should be changed? A. Rebuild Rate in the BIOS settings B. System Profile to Performance in the BIOS settings C. System Profile to Performance in the iDRAC GUI D. Rebuild Rate in the iDRAC GUI Answer: D Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success

  9. 8. A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk. What action should a technician take to help accomplish this goal? A. Configure servers to access the remote firmware repository B. Enable the Match Firmware of Replaced Part setting in the system BIOS C. Install and configure a repository manager D. Enable the Collect System Inventory On Restart (CSIOR) attribute Answer: A Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success

  10. 9.A technician installs eight servers into a fully operational rack with top of rack switch Each server has a quad 1Gb NIC and redundant power supplies. The company uses iDRAC in shared LOM mode with LOM1 as the selected NIC What should the technician do to verify iDRAC connectivity on each server? A. iDRAC Datacenter license is installed. B. Ethernet port LOM1 is cabled and the link light is green. C. iDRAC dedicated NIC port is cabled and the link light is green D. iDRAC Enterprise license is installed Answer: C Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success

  11. 10.Dell EMC PowerEdge 14G servers support which technology? A. Quicksync 1.0 B. Intel Boot Guard C. AMD GuardMI D. iDRAC8 Answer: C Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success

More Related