1 / 9

Generalities

Generalities. J . Kerby. Generalities - Codes. CERN/LHC – US/LHC MOU on Accelerator Mechanical Safety (TIS-TE-MB-98-74) Structural safety Engineering Safety File ASME Pressure Vessel Code / CERN Safety Code D2 Rev 2

cisco
Télécharger la présentation

Generalities

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Generalities J . Kerby

  2. Generalities - Codes • CERN/LHC – US/LHC MOU on Accelerator Mechanical Safety (TIS-TE-MB-98-74) • Structural safety • Engineering Safety File • ASME Pressure Vessel Code / CERN Safety Code D2 Rev 2 • Equipment beyond pure pressure vessels subject to additional engineering evaluation as agreed upon consistent w/ good engineering practice 24-25 Inner Triplet Review - J Kerby

  3. Generalities - Codes • Cold mass / magnet skin welds • D1 accepted as continuation of RHIC series (TIS-TE-MB-lj-2000-06) • MQXA welds qualified through KEK/Toshiba / CERN/TIS • MQXB Welds qualified through FNAL / CERN/TIS 24-25 Inner Triplet Review - J Kerby

  4. Generalities - Codes • All piping, attachments, & vacuum vessels fall under this agreement • Bellows follow EJMA Guidelines • Separate Piping ASME B31.3 • Structural Supports; Support Posts left to engineering practice and designer 24-25 Inner Triplet Review - J Kerby

  5. Generalities – Load Cases • Line pressures / MAWP derived from LHC Project Note 135 (1998) • 300K, 2K, design and test pressures • For all lines simultaneously pressurized, load on Q1 15 tonnes toward IP; Q3 12 tonnes away from IP • Fast transient pressures small; Inner Triplet quenches typically < 8 bar 24-25 Inner Triplet Review - J Kerby

  6. Generalities – Load Cases • Vacuum Loads • Q1 closure back to DFBX; D1 side to DFBX • Gravity • Maximum tunnel slope of <2% longitudinal • Shipping • Including restraints and frame, spec’d to <2g any direction • Successful EXCEPT when contract violated and trains utilized by company 24-25 Inner Triplet Review - J Kerby

  7. Generalities – Boundary Conditions • Supports also have boundary conditions on • Static Heat Load • Transverse Stability 24-25 Inner Triplet Review - J Kerby

  8. Generalities – Materials • Pipes, vacuum vessels as specified in engineering notes • Q1/Q2/Q3 typ 304/304L, 316LN, Vacuum Vessel L485MB • DFBX typ 304/304L/Invar • D1 - RHIC assembly • Supports, Spiders fiberglass / resin composite 24-25 Inner Triplet Review - J Kerby

  9. Generalities – Safety Coefficients • ASME codes for ductile materials typically 3 – 3.5 to ultimate or 1.5 to yield strength (in 1998 Div I was 4 to ultimate) • Welds further derated depending on geometry and inspection • Spider support transverse SF 2 to ultimate • Other BCs included in optimization 24-25 Inner Triplet Review - J Kerby

More Related