1 / 22

Current Electricity

Current Electricity. Explore how a circuit works. Follow the instructions on the handout to investigate how an electrical circuit works. You will find 2 ways to light the bulb and 2 2 ways that do not light the bulb. You will sketch the ways that work and the ways that do not work.

cleo-phelps
Télécharger la présentation

Current Electricity

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Current Electricity

  2. Explore how a circuit works • Follow the instructions on the handout to investigate how an electrical circuit works. • You will find 2 ways to light the bulb and 2 2 ways that do not light the bulb. • You will sketch the ways that work and the ways that do not work. • You will use symbols to represent the parts of the circuit.

  3. Objectives • Explain how electrical energy is supplied to devices in a circuit. • Use electrical symbols to draw simple circuit diagrams. • Distinguish between open and closed circuits.

  4. Which of these circuits will light? A B C D E N Y N N Y F G H I J N Y N Y N

  5. The source of the electrons moving in the circuit is NOT the battery or the wall outlet! The free electrons are contained within the wire itself. An individual electron does not actually travel all the way around a circuit. One electron bumps into the next that bumps into the next that bumps into the next ….. It is the ENERGY that gets transferred all the way around the circuit. You buy energy, not electrons from the electric company!

  6. Flow of Charge • Charge flows when there is a potential difference (voltage).

  7. Voltage pushes current like the force of water in a water tower due to its height pushes the water to flow from high to low. • Current flows through wire/conductors like water flows through pipes.

  8. Resistance to flow of electrons depends on the width and length of wire like water is restricted by the size of pipe

  9. e- e- e- e- e- e- e- e- Current CURRENT: a flow of charged particles (electrons) through a conductor Current, I, is measured in amperes, A, or “amps”. Andre Ampere

  10. Example: What is the current, I, if 8 C of charge passes through a wire in 2 seconds? I = q / t I = 4 amps

  11. The Damage Caused by Electric Shock 60W light bulb - 0.5 A Starter motor – 210 A Clothes dryer – 18 A Iron- 3 A 1 mA = 0.001 A Mild shock can be felt 5 mA = 0.005 A Shock is painful 15 mA = 0.015 A Muscle control is lost 100 mA = 0.1 A Death can occur

  12. Voltage, V SI unit is Volt, V • Voltage is like electric “pressure”provided by batteries (dry cells, wet cells) and generators. • Batteries provide energy from chemical reactions. • Generators provide energy from the conversion of mechanical energy to electrical energy using rotating electromagnets.

  13. Electrical Resistance, RSI unit is Ohm,  • Resistance in a conductor restricts the flow of charge in a conductor. It depends on the materials in the wire and the size/shape of the wire. • Different conductors have different conductivity. • Thick wireshave less resistance than thin wires. • Longer wires have more resistance than short wires.

  14. Finding Current:What is the current through a 30 Ωresistance that has a potential difference of 120 V? • Given: • V = 120 V • I = ? • R = 30 Ω • I = V/ R = 120 V/30 Ω = 4 A

  15. Given: V = ? I = 2 A R = 8Ω V = I·R = 2A·8Ω = 16 V V I R Finding Voltage: How much voltage is required to make 2 amperes flow through a resistance of 8 ohms?

  16. Given: V = 3.0 V I =0.4 A R = ? R = V/I = 3.0V ÷ 0.4A = 7.5Ω V I R Finding Resistance: Calculate the resistance of the filament in a light bulb that carries 0.4 A when 3.0 V is impressed across it.

  17. Many circuit elements do not obey Ohm’s Law. Resistors that get hot, like light bulbs and heating elements, do not keep a constant resistance. Resistance generally increases as objects become hotter. Click here and here to run simulations of Ohm’s Law.

More Related