CDR Australia Sample Pdf

1. Welcome To CDRAustralia.org Email id- Contact@cdraustralia.org Contact to CDRAustralia.org for 100% Approval Guaranteed

2. Career Episode 1 Introduction The first career episode of my Competency Demonstration Report is founded on a project which I completed for the client Kurian George and Sumitha Jacob. I was employed as an Estimator and Quantity Surveyor with SJ Builders Private Limited, Melbourne, Australia. The site address was Ferngully, Crescent, South Morang. I successfully completed this project in 9 months from March 2015 to November 2015. I was assisted by my colleagues in the effectual execution of this project. Background CE1.1 SJ Builders Private Limited is a company that provides perfect building solution for innumerable clients. The company deals in building homes and redesigning them as per the requirements of the clients. The company appoints individual project managers for a project and the project managers thus develop customized housing and Building Solutions. The Company takes projects from client companies and assigns their workforce to execute them successfully. The vision of the company is to provide quality service and product to the clients. CE1.2 This project aimed to develop a site at Fern gully, Crescent, South Morang for the client. I was appointed as and Estimator and Quantity Surveyor. It was a single story building, and the client asked complete designing of the building. I went to the site to gather preliminary details and made a proposal draft out of the collected data. CE1.3 The client analyzed thoroughly the draft proposal prepared by me. Finally, my design and got approved and I was appreciated from both ends. The whole project work Contact to CDRAustralia.org for 100% Approval Guaranteed

3. excluded any costs incurring owing to additional edge beam deepening, bored piers and blinding concrete. Along with this, it also did not include cost of landscaping. CE1.4 During this project work, I fulfilled some critical responsibilities as given below: nquires for material prices, study, compare and negotiate with suppliers and subcontractors and get quotations from them. rafting sites using AutoCAD by considering the required alterations. Personal Engineering Activity CE1.5 I began my work by a thorough study and analysis of the existing process. I proposed a novel layout and contacted with different material suppliers. I sent them quotations for my requirements. I extracted all the vital details and formed a report for my company and my client to comprehend and then executed the project as desired and also in a successful way. It was a brainstorming task for me. CE1.6 I collected the conceptual plan from the architect and thoroughly studied it. I also took working drawings for the site. I also obtained a copy of estate guidelines approval from my company and always adhered to them during the project. I noted the main project requirements and made a MS-Word file in English to be sent to every stakeholder and supplier. CE1.7 I faced some major issues too in this project as it was the first single-handed project. I assured that concrete slab was designed as per structural drawing. It was a crucial component of the whole project. I engineered roof truss frames, and double gazed all the sliding doors of the building. I always took care of safety issues and other project issues to complete this project effectually. CE1.8 I had gained theoretical knowledge from my studies in the university, but this project was my first hands-on practical experience as a Site Structural Engineer, and I found that application of work was different from what I had learned at university. With the help of my supervisors, I succeeded to avoid obstacles and learned how to lead the project in a short period. CE1.9 I prepared the complete work plan. I took data from similar projects, I made calculations based on the old experiences, and I prepared a draft work plan. I discussed it Contact to CDRAustralia.org for 100% Approval Guaranteed

4. with my chief on technical meetings. These work plans consisted of the schedule of the work, work description and the cost of the work. I also dealt with the suppliers to get required amounts of materials which were calculated and determined from the project. CE1.10 My work on-site started with the supervision of work on the foundation of the building. A building audit firm was hired to supervise all construction work. They were responsible for accuracy of the project, and the application on site was performed according to their projections and according to the standards. I didn’t have any disputes with the audit firm, because I made sure that the quality of our work will pass the Construction standards. CE1.11 I supervised both static and architectural projects at the same time. In the delicate works stage, I oversaw all the works done on-site. These works included internal plastering work, papier-mâché work, gypsum work, leveling concrete on the floor, sandpaper the walls before painting, interior painting, etc. Since my work in this position and further on I always work according to the schedule. The schedule helps to manage my time effectively and to prepare progress reports, calculations, and drawings, etc. on time. CE1.12 I always made sure that there must not be any damage to the environment owing to my project activities. I also provided safe workplace standards to my project team, my workers, and all the stakeholders involved in the project execution. I felt fortunate to be given the opportunity to lead this kind of project. It was also a great honor for me to have the appreciation and recognition of my manager on completion of the project. Summary CE1.13 this job was my first hands-on experience as a qualified Site Structural Engineer, and I learned so much about the practical application of the situation. I had the opportunity to practically apply all my civil engineering knowledge in the real sense. I enhanced my time management qualities and also developed my communication skills. In addition to this, I learned many things including how to read a project, leading workers, price analysis, purchasing, communicating with people, etc. I gained knowledge in the field of civil engineering as well as experience in other related areas. I learned great knowledge and skill in building and construction during my time with my company. Contact to CDRAustralia.org for 100% Approval Guaranteed

5. Career Episode 2 Introduction CE2.1 The second career episode of my Competency Demonstration Report is founded on a project which I completed for the client Justin Joseph. I was employed as an Estimator and Quantity Surveyor with SJ Builders Private Limited, Melbourne, Australia. The site address was Turion Drive, Mickleham. I completed this project in 8 months from May 2015 to December 2015. I was assisted by my colleagues in the effectual execution of this project. Background CE2.2 SJ Builders Private Limited is a company that provides perfect building solution for innumerable clients. The company deals in building homes and redesigning them as per the requirements of the clients. The company appoints individual project managers for a project and the project managers thus develop customized housing and building solutions. The company takes projects from client companies and assigns their workforce to execute them successfully. The vision of the company is to provide quality service and product to the clients. CE2.3 I was involved in the construction of this home which was a single story building. I supervised the structural works on site and was responsible for applying for formworks and reinforcement works. I learned all project and geotechnical studies, feasibility studies, cost estimations, etc. I supervised all structural works and submission of related reports to the project manager. I also organized all the stages of structural works starting with the design until the application on site. CE2.4 I arranged the supply of required amounts concrete, steel, formwork, etc. along with a workforce of the project. I assured construction of the structures by contractual and design requirements on site and worked according to the standards. I prepared and submitted a conceptual work plan and drawing of the site. CE2.5 I successfully held following project responsibilities in this tenure: s per specification, drawings and local availability Always updating knowledge of the prices of the construction material by keeping in touch with the suppliers s On- going cost analysis of maintenance and repair work Contact to CDRAustralia.org for 100% Approval Guaranteed

6. Personal Engineering Activity CE2.6 Working on this project was very challenging for me because of the large scope of the project, my direct responsibility for work and on the big number of workers. I applied novel techniques of construction in this project. I browsed the internet to get more information on the techniques. I also read several books and journals to sharpen my skills and capabilities. CE2.7 I held significant project responsibilities. I also worked in the technical office at the same time preparing required documentation, reporting current situations, designing and drawing structure projects. I had technical meetings with my chief at least once a week. In these meetings, I published the works that have been done on site. After sessions, I applied the decisions that have been agreed in meeting on site. CE2.8 I went to the construction site in the mornings every day, and I made briefing meetings with workers. During these briefings, I gave instructions for that day to the workers according to the work schedule that has been decided on our weekly meetings. I recorded the works progress on my field manual and reported the information to the site manager daily. I compared the actions with the projects and also, I controlled the plan compliance. CE2.9 During my site visits I also explained to the workers about the activities they must make to follow the safety rules. With a small technical team, we made risk assessments to detect problems we could encounter on site. As the result of our risk assessments site conditions became following the national health and safety regulations. I made my workers to use safety equipment, and I always observed that they worked according to safety standards. CE2.10 I took over the responsibility of calculations and drawing for the project. Preparing of these drawings provided me with a better understanding of the site and the construction requirements. I applied all my knowledge in civil works, mathematics, IT and engineering fields achieved during my studies, skills that I made during the university studies and my experience obtained during employment in this company in the preparation of the project. CE2.11 When I finished with the calculations of the dimensions of the structures, I drew them in the Auto-CAD. I made predictions by using Excel and prepared the summary tables for the results. When I completed all the calculations and design work, I developed the final report that included engineering sketches, tables, operational descriptions and draft drawings, etc. Then the technical meeting was arranged, and after approval of the project, we started to make an application of the structures on site. CE2.12 In this project I also acted as a member of the office technical team. At the end of the original design stage, I worked with the cost estimation team to define the initial cost of the project and to prepare a report for the project manager. We calculated the amount of the materials necessary for the works, and we received offers from 3 suppliers. We compared these offers, and we found the most effective option regarding price, quality, and deadlines. Contact to CDRAustralia.org for 100% Approval Guaranteed

7. Summary CE2.13 As a result of this project I achieved a high level of knowledge and skill in designing roads. I worked hard to learn about the structure works. I also increased my expertise in understanding complex projects and its software and hardware. I exceeded my expectations and proved to myself that I was more than capable of learning, adapting and excelling at something new. I always kept a professional image working with other engineers, workers, suppliers, and managers. I concluded my objectives on time and the budget. The workers who worked under me were sorrowful as well because I had always taken care of them and protected their rights against other workers and company. After my hard work and performance in this job, I was awarded the 50% increase in my salary by the company. Contact to CDRAustralia.org for 100% Approval Guaranteed

8. Career Episode 3 Introduction CE3.1 The third career episode of my Competency Demonstration Report is founded on a project which I completed for the client Gideon DevavaramBhaskaran and FebinPriyaThanakaraj. I was employed as an Estimator and Quantity Surveyor with SJ Builders Private Limited, Melbourne, Australia. The site address was Mountleigh Circuit, Craigieburn,Victoria. I successfully completed this project in 8 months from September 2015 to May 2016. I was assisted by my colleagues in the effectual execution of this project. Background CE3.2 SJ Builders Private Limited is a company that provides perfect building solution for innumerable clients. The company deals in building homes and redesigning them as per the requirements of the clients. The company appoints individual project managers for a project and the project managers thus develop customized housing and building solutions. The company takes projects from client companies and assigns their workforce to execute them successfully. The vision of the company is to provide quality service and product to the clients. CE3.3 I supervised the structural works on site and was responsible for applying formworks and reinforcement works. I learned all project and geotechnical studies, feasibility studies, cost estimations and all the relevant documentation. I supervised structural work of contractors. I also organized various stages of structural work from design till the application on-site. CE3.4 I arranged supply of concrete, steel, formwork and workers for the proposed production. I was also responsible for construction in accordance with contractual, design and standards requirements. I drafted and interpreted specifications, drawings, plans, construction methods & procedures. I set up work control procedures to ensure that standards of performance, quality, cost & safety are met. CE3.5 I performed below given project responsibilities: Preparing plans, contracts, budgets, bill of quantities, and other documentation Contact to CDRAustralia.org for 100% Approval Guaranteed

9. Researching, investigating and evaluating materials, processes or systems related to civil engineering works. Providing effective communication between various departments. Administering contracts and verifying and certifying satisfactory completion. Determining construction methods, materials and quality standards. Personal Engineering Activity CE3.6 I conducted all stages of civil work by myself from the stage of commencement to the completion of the project. I designed some structure parts that were not existed in the project. I used Microsoft Office and AutoCAD applications for creation of design and documentation. I solved problems that we faced during the construction stage. In order to succeed in this, I made lots of investigations from the different sources and use all my previous experience and knowledge. CE3.7 I also specified which construction contractor would do the structural works. The selection was made through a tendering process. During the actual site work I was submitting progress reports to project manager once in 2 weeks. Also I reported to general manager once for a month. These reports included the cost analysis, time analysis, and works programs. I discussed the materials to be purchased and their costs, suppliers and other technical questions during technical meetings. Also I had general meetings once a week between whole the project team and shared the parts we have done in the project. CE3.8 I supervised both workers and this engineer himself. I discussed the project one-to-one on site, made decisions which applications should have be done according to the customer demands and specifications. I followed the applications that have been made by workers and I have corrected them if they made something wrong. CE3.9 I worked with the mechanical engineers to determine where to put the foundation depending on where the machines were to be located. All of the engineers (civil, electric and mechanic) contributed to the design of the infrastructure and worked in coordination. CE3.10 I found solutions for the problems with the help of his knowledge and his help and I improved myself very much.I was responsible for supervising the contractor on-site as there were different problems that occurred every day. Although the contractor had a civil Contact to CDRAustralia.org for 100% Approval Guaranteed

10. engineer and a master builder they made mistakes therefore a third eye was always useful. The most common mistake was in the reinforcement process. CE3.11 While the construction work continued, I purchased materials for the civil works. I was the only person who understood civil works in the company. In addition to the main requirements concrete and steel, I purchased all materials from anchor bolt, sand and gravel to screws etc. For each different purchase we took three different tenders to compare and I reported to the general manager explaining why I chose that firm and why I needed those materials. The main parameter for the comparison between different companies was quality and cost. I managed this very successfully. CE3.12 Before I started to design the channels, I received soil report, architectural technical data from our mechanical department, topographic field application, other data sheets and various calculations.Then I prepared a draft design for the project. These drafts have been evaluated during technical meeting which were attended by me, mechanical engineers and our project manager. CE3.13 In these meetings we discussed the feasibility of the projects, costs, implementation methods and other technical aspects of the project. I worked in close collaboration with mechanical and electrical engineers. After the evaluation of the draft, I prepared the final project and it was approved by the project manager. Summary CE3.14 I gained great knowledge and skills in concrete, steel, formwork and delicate works during my time in this company working on this Project. Because I was the only engineer in the office and on-site, I learned the key aspects that a designer should take into consideration including the specific details about projects and I had the capability to work with different departments. My time management skills allowed time and my team to finish our objectives on time.I increased my knowledge and experience by applying my professional skills in another company. Contact to CDRAustralia.org for 100% Approval Guaranteed

11. Paragraph career where the element is addressed in the A brief summary of how you have applied the element episode(s) Competency Element PE1 KNOWLEDGE AND SKILL BASE I had successfully concluded engineering objectives assigned to me by my superiors, which clearly demonstrated my knowledge on engineering fundamentals. I performed computations and analysis for my projects. I used my knowledge in structural design and civil engineering for the steel reinforcements in the project I always kept abreast of new developments and technologies pertaining to especially those that related to my current project objectives. I pored through and applied available and applicable literature and research materials that would affect current project outcome. I am aware of the necessary interface inherent engineering systems different stakeholders of every project. CE1.12-CE1.14, CE2.12-CE2.13, CE3.12-CE3.13 PE1.1 Comprehensive, theory- based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable engineering discipline fundamental the theories to the CE1.6, CE1.8, CE2.5, CE2.6,CE2.7, CE2.9, CE3.5, CE3.11 PE1.2 Conceptual understanding of the numerical statistics and computer and information sciences which underpin the engineering discipline mathematical numerical mathematics, analysis, CE1.11-CE1.12, CE1.11, CE2.6, CE2.7,CE2.8, CE3.8, CE3.13 CE1.10, CE2.5, CE3.7 CE1.8, CE3.12 PE1.3 In-depth understanding of specialist knowledge engineering discipline bodies within of the CE2.4, CE3.12- PE1.4 my discipline Discernment of knowledge and within discipline development directions engineering research the CE2.13, CE1.5, CE1.7, CE1.9, CE1.13, CE2.13, CE3.8-CE3.9, CE3.13 CE1.4, PE1.5 Knowledge of contextual factors impacting engineering discipline between and CE2.8, the the CE1.10, Contact to CDRAustralia.org for 100% Approval Guaranteed

12. I am aware of the roles and significance of the engineering workforce to the favorability of the project outcome. I always used the systematic approach when engineering designs projects. I am knowledgeable on the principles of Project Management as it pertains to construction works. CE2.9-CE2.10, CE3.10 CE1.6, CE1.8, CE2.5, CE2.13, CE3.7, CE3.11 CE1.5, CE1.7, CE1.8, CE2.4, CE2.8-CE2.9, CE3.4, CE3.6 creating for CE3.5, PE1.6 Understanding of the scope, principles, norms, accountabilities and bounds of engineering practice in the specific discipline my contemporary PE2 ENGINEERING APPLICATION ABILITY I made sure that major activities for every project were based on sound and engineering principles. I researched solutions to complex problems encountered in my projects. I am very proficient in identifying the best materials for the project objectives. I am skilled in preventing, detecting and repairing problems in the construction, processes and operations in my projects. I always conformed to client’s requirements, other stakeholder’s specifications and regulations for each project. I have always been aware of my CE1.7, CE1.12, CE2.7, CE3.7, CE3.12 CE1.14, CE3.14 CE1.11- CE2.4, PE2.1 Application of established engineering complex problem solving fundamental methods engineering to CE2.13, CE1.9, CE2.9, CE3.10 CE1.10, CE3.8, CE3.11 PE2.2 Fluent application of engineering tools and resources CE2.10, techniques, CE1.5, CE1.13, CE3.4, CE3.12 CE1.13, CE2.6-CE2.8, CE1.12- CE2.4, PE2.3 Application of systematic engineering synthesis and design processes applicable Contact to CDRAustralia.org for 100% Approval Guaranteed

13. accountability for all my designs and engineering works. I always incorporated considerations in all of my project objectives. CE3.8 CE1.8-CE1.9, CE2.5, CE2.9, CE3.5, CE3.9 PE2.4 Application of systematic approaches to the conduct and management engineering projects cost of PE3 PROFESSIONAL AND PERSONAL ATTRIBUTES I have made safety compliance in the workplace one of the guiding principles on all of my work and projects. I have written and prepared engineering documents and reports CE1.6, CE2.5, CE2.10, CE3.4 CE1.8, CE2.4-CE2.5, CE2.7, CE3.4-CE3.5, CE3.10 CE1.10, PE3.1 Ethical professional accountability conduct and PE3.2 Effective oral and written communication professional domains in lay and I have used novel approaches to solve problems encountered in my projects. I have sought out knowledge of advances and new technological developments in my profession. I am proficient in gathering, assessing and utilizing information and data critical to the success of the project objectives. I am capable documentation and am aware of control procedures needed for the management of objectives. I have always made it a point to CE1.14, CE3.14 CE1.10, CE3.5, CE2.13, PE3.3 Creative innovative and proactive demeanour CE2.5, CE1.8, CE2.13, CE3.7 CE1.6, CE2.5, CE2.9, CE3.4- CE3.5, CE3.11 PE3.4 Professional use and management of information of tracking CE1.11, the project CE1.10, CE2.5, CE3.7 PE3.5 Orderly management of self, and professional Contact to CDRAustralia.org for 100% Approval Guaranteed

14. conduct upgrade my professional and technical knowledge. I have always managed my own and team’s time to finish our/my project objectives. I have always comported myself in a professional dealing with the stakeholders of the project. I led and/or was a part of the team of engineering technicians, crafts persons, and manual laborers construction projects. I have sought out knowledge and help from various sources and experts and professionals produce engineering solutions. CE1.14, CE3.14 CE1.9-CE1.10, CE2.10, CE3.11, CE3.12 CE2.13, manner when CE3.10- CE1.4, CE2.8, CE2.9, CE3.10-CE3.11, CE3.13 CE1.7, CE2.5, CE3.7, CE3.13 professionals, in various PE3.6 Effective team team membership leadership and to Contact to CDRAustralia.org for 100% Approval Guaranteed

15. Continued Professional Development I incorporate my knowledge of civil engineering in all my projects. I always emphasize the latest trends in designing, styles, computer-aided software designs and numerical analysis of the projects. All through the projects, I regularly updated my knowledge and learning capabilities by visiting libraries, seeking help from reference books, and exchange of ideas and thoughts in peer- to-peer communication. I was also environmentally conscious, so provided environmental- friendly site designs of my projects. I also ensured the quality of raw material used in the construction and gave particular importance to cost-effective raw materials. I incessantly updated my relevant skills and technical expertise by attending workshops, and seminars. I was always endeavoring to achieve my project goals by presenting some conference papers as well. I generally communicate with my seniors and took help from internet reading any new inclusion in the project Contact to CDRAustralia.org for 100% Approval Guaranteed

16. Get Free Consultant Contact@cdraustralia.org https://cdraustralia.org/ Contact to CDRAustralia.org for 100% Approval Guaranteed