1 / 15

What To Do When…?

What To Do When…?. Ken Kopp, FCLSA Clinical and Professional Services Manager Paragon Vision Sciences. WTDW.. A CRT lens is broken. Our replacement policy is 30 days from dispensing. Order a duplicate and return any lens pieces in the original vial for credit. Spare lenses are vital.

courtney
Télécharger la présentation

What To Do When…?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. What To Do When…? Ken Kopp, FCLSA Clinical and Professional Services Manager Paragon Vision Sciences

  2. WTDW.. A CRT lens is broken. Our replacement policy is 30 days from dispensing. Order a duplicate and return any lens pieces in the original vial for credit. Spare lenses are vital.

  3. WTDW…the suggested lens is not in my set. • Follow the suggested RZD/LZA combination and choose the BC closest to what is suggested. • The OR will tell you the exact BC needed. • Dispense and follow-up for adequate centration. Order the correct BC. Extended set or order with warranty

  4. WTDW…the lens will not center. Superior/Lateral or Superior and Lateral: Increasing the RZD once (25 microns) or twice (50 microns) until centered. Treatment zone will shrink. Then reduce the sag (RZD/LZA) to complete treatment. Increase diameter as last resort.

  5. WTDW…induced cyl is not eliminated. If decreasing the sag (LZA/RZD) does not “squash” the cyl and causes the lens to decenter, withdraw and start over using a deeper RZD but less LZA that originally suggested. If the topography shows an oval treatment zone or an incomplete “red ring”, increase the RZD 25 microns.

  6. WTDW…halos and glare are a problem. These are normal adaptive symptoms. They should disappear after full treatment. If not, it could be from the pupil dilating outside the treatment zone or high order spherical aberration. Ask the patient to wear the lenses when halos are experienced. If yes, pupil dilation is the cause. If not, reduce the sag (LZA). Alphagan P (off-label)

  7. WTDW…central staining or SPK is present. Initial staining is common, especially in the higher Rx (>-4.00). Review proper lubrication techniques and offer either non-preserved drops or more viscous. A sag increase (RZD or BC) may be indicated to ease off the central pressure. Once staining is eliminated, then return to original parameters. If the staining is not eliminated, withdraw.

  8. WDTW…a diameter change is needed. The normal diameter is 10.5 mm. If the 10.5 lens covers the entire visible iris, an 10.0mm diameter is indicated. If a centered 10.5 mm lens displays at least 1mm of visible iris around the circumference, a larger lens could be worn. In order to mimic the edge lift with a 10.5 lens and you need to alter the diameter, decrease the LZA by one degree for a 10.0 lens and increase the LZA by one degree for each .5 mm larger. Diameter availability range is from 10.0 to 12.0 mm. The treatment zone size is fixed at 6mm.

  9. WTDW…the patient calls after 3-6 months complaining of VA reduction. Usually due to a build-up of deposits on the back surface of the lens. • Inspect the lenses for deposits. • Dispense a separate GP daily cleaner. • Have the patient use a Q-tip to clean BC. • Soak in Progent. (in-office only) • Never polish the back surface of CRT.

  10. WDTW…there are changes at the annual visit. If there is no change in OR but the manifest/ centration has slipped, replace the lenses with the same parameters. If the OR has changed to the minus side, flatten the BC accordingly but keep the RZD/LZA constant. Don’t try to extend the wearing life of the lenses by polishing. Micron changes in the lens shape can cause treatment disorders.

  11. WTDW…the VA of one eye does not match the fellow eye. Are the lenses switched? If not, look at centration. Make necessary sag changes in order to achieve proper centration. Verify the OR is correct and hasn’t changed. If undertreatment is <-1.00, flatten BC by 0.1mm If undertreatment is >-1.00D, decrease LZA by 1

  12. WTDW…a long term GP wearer wants CRT. Pre-fitting data will help. If so, compare current K readings, topos, and Rx to confirm changes. If GP lenses were fitting centrally, trial CRT for positioning and OR. If normal pattern and OR…continue treatment. If GP lenses were superior riding, take baseline map and wait until the cornea stabilizes.

  13. WTDW…a CRT candidate/patient is pregnant. Corneal changes usually do not affect wearing or treatment until the third trimester. Use common sense. If the patient is uncomfortable with their vision or wear ability, withdraw until postpartum is complete.

  14. WTDW…you haven’t seen a CRT candidate in months. • Have a staff meeting to re-energize the group to promote CRT. • Fill all POP materials. • Make sure your DDS doesn’t look like Swiss cheese (many holes). • Review initial fitting and troubleshooting techniques.

  15. Thank you for participating!

More Related