1 / 24

Status of the LIDO East Sicily Station

Status of the LIDO East Sicily Station. F.Bruni. AGENDA. Work progress status Payload SN-1 observatory Integrations Surface station HMI Test program Deployment procedure. LIDO East Sicily Station. Based on SN-1 seafloor observatory properly upgraded

dayk
Télécharger la présentation

Status of the LIDO East Sicily Station

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Status of the LIDO East Sicily Station F.Bruni

  2. AGENDA • Work progress status • Payload • SN-1 observatory • Integrations • Surface station • HMI • Test program • Deployment procedure

  3. LIDO East Sicily Station • Based on SN-1 seafloor observatory properly upgraded • Two missions successfully completed • 2002-2003 (autonomous configuration) • 2005-2008 (hybrid configuration, compatible with cabled or autonomous operation)

  4. LIDO East Sicily Station • Modified/changed • All batteries removed • Acoustic telemetry removed • Mass memory devices removed • New optical telemetry • New power management and distribution • Scientific payload increased • Dedicated frame for magnetometers • Completely new Shore Station implemented • Sensors individually accessible from shore • Maintained • Frame • MODUS-assisted deployment and recovery • Seismometer installation procedure • Interface with electro-optical cable • Sensors directly managed by SN-1 DACS

  5. SN-1 observatory general assembly Bioacoustic hydrophone DPG ADCP Magnetometers module DACS ROV mateable connector (in parked position) Depth sensor Bioacoustic bentosphere

  6. SN-1 observatory general assembly Currentmeter Seismometer + release OAS hydrophone CTD Gravity meter SMID hydrophone Bioacoustic bentosphere Magnetometers module

  7. Work progress status (Tecnomare)

  8. Payload

  9. SN-1 observatory general assembly

  10. Magnetometer module layout Vectorial magnetometer (glass sphere) Weight in air : about 125 kg Weight in water: about 17 kg Lifting handle (hinged) Lifting handle (fixed) Scalar magnetometer Buoyancy elements (adjustable number and position) Magnetometers j-box

  11. Magnetometers module layout

  12. Mechanical frame status

  13. Payload test: seismometer – DPG – OAS hydrophone • Sensors: • Guralp CMG-1T (s/n T1049) • DPG vs 6.3 (s/n 05057) • Hydrophone OAS E-2PD (ex SN-4) Acquisition through Guralp DM24 digitizer (s/n A1699) - 100 Hz DATA ACQUISITION ELECTRONICS SEISMOMETER DPG HYDROPHONE

  14. Seismometer and digitizer Seismometer and digitizer after upgrading work (Dec. 2008 – Nov. 2009)

  15. Payload test: seismometer – DPG – OAS hydrophone

  16. SN-1 electronics: DACS integration Ethernet – RS232 converters Compass CPU, switch OPTICAL BOX (telemetry) 24-bit digitizer DC Power supplies (12, 24, 48 VDC) IMU AC transformer

  17. SN-1 electronics: magnetometers J-BOX Vectorial magnetometer electronics (power supply + 24 bit digitizer) integrated inside a dedicated pressure vessel

  18. Shore station station: power supply and control

  19. Shore station: power supply rack • Generates 500 VAC mono-phase for the observatory through a step-up isolation transformer • Requires 230 VAC input • Monitors the umbilical cable isolation • Automatic and manual output voltage ramp control (soft start) • Display of power status parameters (current in, voltage in, current out, voltage out, isolation resistance) • Equipped with an intelligent unit (PLC) • Transmit power status data through RS-232 connection to the HMI PC

  20. Data acquisition rack: telemetry unit SC optical connectors to the surface OPTICAL BOX Data connections to SN-1 sensors: RS-232 Underwater LAN RJ45 connectors 220 VAC GPS input (MIL) and telemetry (2 x SC)

  21. HMI Control software

  22. Final test program (proposal)

  23. Final test program (proposal)

  24. Deployment and start-up procedure (preliminary for discussion) • ship final positioning on site • MODUS + SN-1 deployment • (winch) descent • (MODUS) final positioning and alignment with respect to INFN j-box • (winch) touch-down • (MODUS) disconnection • MODUS recovery • ROV deployment • (ROV) connection of the electro-optical jumper to INFN j-box • (shore station) Switch on power supply • (shore station) check of SN-1 observatory and payload status • (ROV) extract and deploy the magnetometers module • (shore station) check of magnetometers module • (shore station) release seismometer, start mission • ROV recovery

More Related