1 / 11

Impact and Sound Absorption of Porous Aluminum and Magnesium Alloy

MRS KOREA. M aterials R esearch S ociety of K orea. Impact and Sound Absorption of Porous Aluminum and Magnesium Alloy. Mechatronics Lab & i -cube center Joint Project School of Nano and Advanced Materials Engineering School of Mechanical Engineering. Agenda. Introduction

desirae-klein
Télécharger la présentation

Impact and Sound Absorption of Porous Aluminum and Magnesium Alloy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MRS KOREA Materials Research Society of Korea Impact and Sound Absorption of Porous Aluminum and Magnesium Alloy Mechatronics Lab & i-cube center Joint Project School of Nano and Advanced Materials Engineering School of Mechanical Engineering

  2. Agenda • Introduction • Experimental Method • Material for Experiment • Results - Sound Absorption • Equation for Damping ratio • Results – Vibration-Absorption • Conclusion

  3. Introduction • A compound metal of foaming Magnesium is possible using a foaming agent. • Magnesium is lighter and stiffer than Aluminum. • Foaming aluminum-alloy has sound-absorption and vibration-absorption. • The comparison and analysis of quality is necessary between Al and Mg so that Mg has competitive. • This present time, Al is applied from the research which it sees consequently, in field of Mg more. It could be applied with the material which is excellent. • In order to evaluate a quality basic it used 2 branch methods and it measured the quality of material quality of the aluminum and Magnesium. • Tube Method • FFT Analyzer

  4. Experimental Method Tube Method FFT Analyzer (Ono Sokki C5-5200) • The sound-absorbing characteristic test used Tube Method and it tested the aluminum and the Magnesium forming metal. It gave Air gap 10,30,50mm and it measured the sound-absorbing effect. • The test used the machine and the vibration measured how many diminish quickly using FFT Analyzer(Ono Sokki C5-5200). For the comparison of the metal and also the Ingot of the AM60 tested together.

  5. a b c Fig.1. Photographs of Specimen for Impact and Sound Absorption Test. a) Aluminum Foam, b) AM60 Foam (Mg) , c) AM60 Ingot (Mg) Material for Experiment

  6. Results - Sound Absorption Comparison of sound absorption coefficient with a) AM60 b) Pure Al • The recording low frequency sound-absorbing characteristic where the measurement result Air gap will be big became larger. • The highest point from each condition almost to be near 1. Sound-absorbing characteristic quite is superior.

  7. Equation for Damping ratio Quality factor and bandwidth

  8. Natural Frequency and Damping ratio Natural frequency (Hz) Damping ratio (ξ) Pure Al 3244 0.72 % AM60 2888 0.83 % AM60 Ingot 4922 0.63 % Results – Vibration-Absorption Damping ratio of Magnesium Forming metal was higher than Aluminum. (0.11%)

  9. Modal Analysis which uses ANSYS

  10. Conclusion • The objective of the test is to measure a quality and to compare blow. • Currently foaming Magnesium which are used wide industries and foaming aluminum research which are applied and actively advanced. • It evaluates a Magnesium application characteristic. • Sound-absorbing characteristic of Magnesium Forming metal quite is superior in the result of Sound Absorption. • Damping ratio of Magnesium Forming metal was higher than Aluminum in the result of Vibration-Absorption . • Consequently there is a necessity which will research quality, light weight and the quality of high-in-tensity of Magnesium Forming Metal. • In the future the more many research is necessary.

  11. Q & A Thank you

More Related