1 / 15

Bipolar Junction Transistor (BJT) Chapter 12 31 March and 2 April 2014

Bipolar Junction Transistor (BJT) Chapter 12 31 March and 2 April 2014. Operation involves both electrons and holes, so is called “bipolar” Junction E-B is forward biased, so electrons from the E (emitter) to the B (base)

desma
Télécharger la présentation

Bipolar Junction Transistor (BJT) Chapter 12 31 March and 2 April 2014

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Bipolar Junction Transistor (BJT) Chapter 1231 March and 2 April 2014 • Operation involves both electrons and holes, so is called “bipolar” • Junction E-B is forward biased, so electrons from the E (emitter) to the B (base) • Junction B-C is reverse biased, so minority carrier electron concentration in B region at the B-C edge is close to zero. • In the B region, there is large gradient of electron (minority carrier) concentration; the electron injected from E region will diffuse across the B region into the B-C space charge region • An electric field due to the B-C reverse bias will sweep the electrons to the C (collector) region • The B regions must be thinner than the minority carrier diffusion length in order to make as many electrons as possible to reach the C region.

  2. Operation modes of BJT Analysis: Active mode: most useful bias mode when using a bipolar junction transistor as an amplifier Cutoff mode: no electron injected to the base, all currents are zero. Used as “off” state in digital circuits or open switch Saturation mode: used as “on” state in digital circuits or closed switch Reverse active mode: emitter and collector regions switch roles. Seldom used. 12

More Related