1 / 23

CribMaster™ AMS Toolbox

CribMaster™ AMS Toolbox. CribMaster Support Options http://www.cribmaster.com/vending.html ftp.ecribmaster.com/pub Videos - ftp.ecribmaster.com/pub/documentation/videos/ Technical Support 1-855-CRIB-CMS 1-855-274-2267 CribMaster Support portal – support@cribmaster.com. AMS ToolBox intro.

diallo
Télécharger la présentation

CribMaster™ AMS Toolbox

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CribMaster™ AMS Toolbox

  2. CribMaster Support Optionshttp://www.cribmaster.com/vending.html ftp.ecribmaster.com/pubVideos - ftp.ecribmaster.com/pub/documentation/videos/Technical Support 1-855-CRIB-CMS1-855-274-2267CribMaster Support portal – support@cribmaster.com

  3. AMS ToolBox intro • The original CribMaster ToolBox was the first of all the CribMaster vending solutions – 1992 • Specs: 73”H x 39”W x 41.5” D, approx. 698lbs. unstocked (185.4 cm x 99.1 cm x 105.4 cm, approx. 317kg) Add 5.8” (15 cm) for pallet height • 120 volt/60 Hz, 4 amps (North America) • 240 volt/50 Hz, 2 amps (Europe) • Temperature Range -4F to 140F (-20 to 60 Celsius) • Humidity of 20% to 80% RH Non-Condensing • Specific model is AMS 39 – 660 • Possible 1,920 individual items. • Coil size and pitch options – Many Options

  4. Un-Crating the AMS Toolbox • Fork Lift close to vending location • Remove retaining clips • Fork lift upward to remove pallet

  5. Power and connectivity *

  6. Power input components

  7. Power switch

  8. Power input components

  9. coil size and pitch options Small Coil – 5, 7, 8, 9, 10, 12, 15, 18, 24, 32 Large Coil – 4, 5, 7, 9, 10, 12, 15 Dual Coil – 5, 7, 10, 12, 15, 24

  10. coil pitch by Inches

  11. coil pitch by Metric

  12. Different types & sizes of coils

  13. Different types & sizes of coils

  14. AMS Toolbox Bin Naming Bin Naming Format<Crib #>-<Shelf #>-<Bin or Tray #> Ex: 10-01-01 is located in Crib 10, Shelf 1, Bin/Tray 01

  15. Sizing & Packaging are key! Show Toolbox Packaging Video • Methods and materials to help items dispense correctly: • Rubber bands • Plastic bags • Roll and cuff gloves or sleeves, especially any glove with rubber or sticky surfaces • Test with multiple items in coil to ensure total resistance is not greater than the motor(s) can dispense properly!

  16. INSTALLATION AND TRAINING RECEIVING ITEMS INTO THE AMS TOOLBOX ADJUSTING AND COUNTING ITEMS ISSUING ITEMS FROM THE AMS TOOLBOX

  17. Replacing parts & Testing • Removing Coils • Removing Helix Adapter • Removing Coil Wing/Plastic Triangle • Replacing Motors • Removing Tray/Drawer • Removing Dividers • Installing Riser • Testing Coils: ATR9 Software and Internal Control Panel • Show AMS Helix and Motor Configuration video

  18. Steps for installing riser1. Bracket in place

  19. Steps for installing riser2. Slide the curved end of the Riser in first/Screw in the 2 screws to secure

  20. Steps for installing riser 3. Completed riser

  21. ATR Setup Add AMS Toolbox, NOT ToolboxMachine!

  22. Troubleshooting • Motors can be spun using the internal control panel. • Motors can be spun using ADMIN / ADJUST / OPEN within CribMaster ATR. • Motors can also be spun using a CribMaster Utility application called “SPIN”.

  23. Troubleshooting • Incorrect Item packing will ultimately lead to jams. • Incorrect item sizing can lead to jams.

More Related