1 / 18

CubeSat DeOrbit System

CubeSat DeOrbit System. Trevor jackson joshua barham Troy Tarnacki Joseph mcnamara Timothy Lynch Joe powell Amanda sokolsky Mackenzie Webb. System Functionality Overview. Stowed. Deploying. Deorbiting. 3.937”. 4.488”. 0.898”.

dorian-raymond
Télécharger la présentation

CubeSat DeOrbit System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CubeSat DeOrbit System Trevor jackson joshua barham Troy Tarnacki Joseph mcnamara Timothy Lynch Joe powell Amanda sokolsky Mackenzie Webb

  2. System Functionality Overview Stowed Deploying Deorbiting

  3. 3.937” 4.488” 0.898” • Maintains 70 in³ volume of original CubeSat structure • Uses only 14 in³ of internal volume 3.937”

  4. G-10 Wire Cap 0.028 lb G-10 Cap 0.0356 lb G-10 Wire Mount 0.00387 lb Mylar Film ˂0.0001 lb Aluminum Footplate 0.00336 lb Aluminized Mylar Inflatable 0.13684 lb Aluminum Baseplate 0.40496 lb TOTAL Estimated System Mass 0.61273 lb 20% of Max CubeSat Mass

  5. Wireless Electronics • Software • Circuit Board Fabrication • Approx. (1 in x 0.75 in) • Vacuum Testing

  6. Cutting Wire Deployment Validation • G-10 Glass Epoxy Sheet • Thermally & Electrically Non-Conductive • 3-D Printed Baseplate • Successful insulation of cutting wire

  7. Film Materials and design • Non-pressurized baseplate • Mylar Strap design • Testing results

  8. Inflatable Development • Inflatable Cross-Sectional Area: • 0.24 m2 (366.43 in2) • Desired/Theoretical Area: • 0.37 m2 (562.77 in2) • Orbital Decay Period • Folding Pattern Constraints

  9. Thermal Analysis Thermal Analysis Template • Results and Conclusions

  10. Heating Element • Use Kanthal wire as a heating element to build up heat and start the sublimation process. • Test insulation and other methods to build up heat in the CubeSat.

  11. Benzoic Acid Application Results • 3 Methods • Powder – from literature • Paste – best • Aerosol – weak • See if it attached to the Mylar • Paste and Aersol

  12. Baseplates

  13. Tether • Four point system • Kevlar • Science potential • Addition of strain gauge • Cutting system

  14. Budget • G-10 Material - $85.95 • 24 Gauge Cutting Wire - $4.00 • 34 Gauge Cutting Wire - $9.00 • Graphite Thermal Gasket - $23.07 • Sprayer Val-Pack Kit (2x) - $56.71 • Kevlar Braided Cord - $16.98 • Hardware - $18.40 TOTAL: $214.11

  15. Conclusion • Low mass, volume, and cost design • Working prototype • Space Act Agreement (SAA) underway with NASA Langley for testing and validations

  16. GANTT

  17. Questions?

More Related