1 / 10

Injector Requirements Cecile Limborg, SLAC April 24, 2002

Injector Requirements Cecile Limborg, SLAC April 24, 2002. Injector Overview Project Performance Goals Physics Performance Requirements for Long-Lead Procurements Operating range Tolerances, Safety Factors R&D Status. Hi Cecile.

dstoddard
Télécharger la présentation

Injector Requirements Cecile Limborg, SLAC April 24, 2002

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Injector RequirementsCecile Limborg, SLACApril 24, 2002 • Injector Overview • Project Performance Goals • Physics Performance Requirements for Long-Lead Procurements • Operating range • Tolerances, Safety Factors • R&D Status Presenter’s Name, Organization

  2. Hi Cecile • Get coordinated with dave and john s. to check for consistency and to avoid too much redundancy ( some is ok) • Performance requirements must be identical to those in the LCLS website. • The items or subsystems on your performance requirements list should correspond to dave dowell’s list • Conclusions- (choose your own words to communicate the following) • most of the LCLS injector linac is standard SLAC design, no technical risk • Gun performance has received a lot of attention; simulations agree with GTF measurements • -LCLS has safety margin for reaching saturation with this injector (coordinate this with HD and paul) • I don’t yet know how to present the followrng • -lower injector energy • -possible need for modification of first accelerating structure to dual-feed • Cover progress in gun simulation in some detail, report added features. • Coordinate comparison with GTF measurements with dave dowell – a little repetition is just fine • But you should not spend overmuch time going over the same data in the same detail Presenter’s Name, Organization

  3. Injector Overview • Bullet-1-1 • bullet-2-1 • bullet-2-2 • bullet-3-1 • bullet-3-2 • bullet-4-1 • bullet-4-2 • bullet-5-1 • bullet-5-2 • bullet-5-3 • bullet-4-4 • bullet-3-4 • bullet-2-3 • Bullet-1-2 Presenter’s Name, Organization

  4. Injector Performance Requirements • Bullet-1-1 • bullet-2-1 • bullet-2-2 • bullet-3-1 • bullet-3-2 • bullet-4-1 • bullet-4-2 • bullet-5-1 • bullet-5-2 • bullet-5-3 • bullet-4-4 • bullet-3-4 • bullet-2-3 • Bullet-1-2 Presenter’s Name, Organization

  5. System/Component 1 Performance Requirements References, explanation Presenter’s Name, Organization

  6. System/Component 2 Performance Requirements [1] References, explanation Presenter’s Name, Organization

  7. Injector R&D Status (include references, pubs) • Bullet-1-1 • bullet-2-1 • bullet-2-2 • bullet-3-2 • bullet-4-1 • bullet-4-2 • bullet-5-1 • bullet-5-2 • bullet-5-3 • bullet-4-4 • bullet-3-4 • bullet-2-3 • Bullet-1-2 Presenter’s Name, Organization

  8. TEMPLATE DESCRIPTION • Slide Master Rules • Please place Talk Title at Upper Right, • and Individual Lab Logo at Lower Right (see selection on last slide) • Color Suggestions… • No light colors for text (e.g., use yellow sparingly and only for non-critical information) • Beware of intense, contrasting colors • Plotting guidelines • verify scales are readable from back of room (e.g. >12 font-size) • verify plots show units clearly Presenter’s Name, Organization

  9. UCLA LLNL Selection of laboratory logos to place at lower right Presenter’s Name, Organization

  10. Presenter’s Name, Organization

More Related