1 / 35

Supersonic Wings

Supersonic Wings. P M V Subbarao Professor Mechanical Engineering Department I I T Delhi. An appropriate combination of Shocks & Expansion Waves…. Supersonic Flow Over Flat Plates at Angle of Attack. Review: Oblique Shock Wave Angle. Prandtl-Meyer Expansion Waves.

duke
Télécharger la présentation

Supersonic Wings

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Supersonic Wings P M V Subbarao Professor Mechanical Engineering Department I I T Delhi An appropriate combination of Shocks & Expansion Waves…

  2. Supersonic Flow Over Flat Plates at Angle of Attack

  3. Review: Oblique Shock Wave Angle

  4. Prandtl-Meyer Expansion Waves q<0 .. We get an expansion wave (Prandtl-Meyer)

  5. • Compare to Flat Plate CD = 0

  6. Wings At Zero Angle of Attack • Subsonic Wing in Subsonic Flow • Subsonic Wing in Supersonic Flow • Supersonic Wing in Subsonic Flow • Supersonic Wing in Supersonic Flow • Wings that work well sub-sonically generally Don’t work well supersonically, and vice-versa

  7. • A leading edge in Supersonic Flow has a finite maximum wedge angle at which the oblique shock wave remains attached Supersonic Airfoils g=1.1 g=1.1 g=1.05 g=1.2 g=1.3 g=1.3 g=1.4 g=1.4 • Beyond that angle shock wave becomes detached from leading edge

  8. Supersonic Flow Over an Airfoil g=1.1 Detached shock wave g=1.3 Localized normal shock wave • Normal Shock wave formed off the front of a blunt leading causes significant drag

  9. Supersonic Airfoils • To eliminate this leading edge drag caused by detached bow wave Supersonic wings are typically quite sharp at the leading edge • Design feature allows oblique wave to attach to the leading edge eliminating the area of high pressure ahead of the wing. g=1.1 g=1.3 • Double wedge or “diamond” Airfoil section

  10. Supersonic Airfoils : Positive Angle of Attack Dull Oblique Shock 2 4 1 6 3 5 Intense Oblique Shock

  11. Supersonic Airfoils : Positive Angle of Attack • • A supersonic airfoil at positive angle of attack : • A dull shock at the top leading edge. • An intense shock at the bottom. • • The airflow over the top of the wing is now faster. • • Further acceleration through the expansion fans. • • The Expansion fan on the top is more intense than the one on the bottom. • • Combined result is faster flow and lower pressure on the top of the airfoil. g=1.1 g=1.3 • We already have all of the tools we need to analyze the flow on this wing

  12. Supersonic Airfoils : Negative Angle of Attack g=1.1 g=1.3

  13. •When supersonic airfoil is at negative angle of attack at the top leading edge there is a expansion fan and oblique shock at the bottom. • Result is the airflow over the top of the wing is now faster. • Airflow will also be accelerated through the expansion fans on both sides. • Result is much faster flow on top surface and therefore lower pressure on the top of the airfoil.

  14. Supersonic Flow on Finite Thickness Wings at zero a ] / t 2 [ = e - e e = 2 s i n ( ) s i n ( ) s i n ( ) D b p l p l 2 3 r a g l [ ] = - D b p p t 2 3 r a g • Symmetrical Diamond-wedge airfoil, zero angle of attack Þ p2 > p1

  15. Supersonic Wave Drag • Finite Wings in Supersonic Flow have drag .. Even at zero angle of attack and no lift and no viscosity…. “wave drag” • Wave Drag coefficient is proportional to thickness ratio (t/c) • Supersonic flow over wings … induced drag (drag due to lift) + viscous drag + wave drag

  16. Symmetric Double-wedge Airfoil … Drag Thickness ratio

  17. Increasing mach • Look at mach number Effect on wave drag • Mach Number tends to suppress wave drag Thickness ratio

  18. • How About The effect of angle of attack on drag Induced drag Wave drag + a=0 =

  19. Total drag Mach constant Increasing t/c

  20. The effect of angle of attack on Lift + Lift Coefficient Climbs Almost Linearly with a =

  21. • For Inviscid flow Supersonic Lift to drag ratio almost infinite for very thin airfoil t/c = 0.035 • But airfoils do not fly in inviscid flows + =

  22. t/c = 0.035 • Friction effects have small effect on Nozzle flow or flow in “large “ducts” • But contribute significantly to reduce the performance of supersonic wings + =

  23. Disadvantages of Sharp Edged Wings • Problem with sharp leading edges is poor performance in subsonic flight. • Lead to very high stall speeds, poor subsonic handling qualities, and poor take off and landing performance for conventional aircraft

  24. Wing Sweep Reduces Wave Drag • One way to augment the performance of supersonic aircraft is with wing sweep … • Lowers the speed of flow Normal to the wing … • Decreasing the strength Of the oblique shock wave • Result is a Decrease in wave Drag and enhanced L/D

  25. Geometrical Description of Wing Sweep

  26. Equivalent 2-D Flow on Swept Wing • Freestream Mach number resolved into 3 components i) vertical to wing … ii) in plane of wing, but tangent to leading edge iii) in plane of wing, but normal to leading edge

  27. • Equivalent Mach Number normal to leading edge

  28. • Equivalent angle of attack normal to leading edge

  29. • Equivalent chord and span • Chord is shortened • Span is lengthened

  30. • Equivalent 2-D Lift Coefficient

  31. • Equivalent 2-D Drag Coefficient

  32. • Solve for CL, CD, L/D

  33. • Unswept Wing CL: 0.205 CD: 0.3606 L/D: 5.68441 • 30 Swept Wing CL: 0.2533 CD: 0.03909 L/D: 6.4799 • WOW! … 14% IMPROVEMENT IN PERFORMANCE

  34. F-14 Tomcat The F-14's wing sweep can be varied between 20 and 68° in flight, and is automatically controlled by an air data computer. This maintains the wing sweep to give the optimum lift/drag ratio as the Mach number varies. The system can be manually overridden by the pilot if necessary. When the aircraft is parked, the wings can be swept to 75°, where they overlap the tail to save space on tight carrier decks.

More Related