1 / 14

Write a SOP (standard operating procedure) for doing a titration

Bell Work. Write a SOP (standard operating procedure) for doing a titration. Do not use your books Hints – diagram, use known/unknown/ tips. Big Picture. Assessment at AS. CI p371. Learning Outcomes. Content Process Benefit. Skill of carrying out a titration

ecohen
Télécharger la présentation

Write a SOP (standard operating procedure) for doing a titration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Bell Work Write a SOP (standard operating procedure) for doing a titration Do not use your books Hints – diagram, use known/unknown/ tips

  2. Big Picture Assessment at AS

  3. CI p371

  4. Learning Outcomes ContentProcessBenefit • Skill of carrying out a titration • Calculate unknowns and percentage uncertainty • Carry out a titration • Help in 10% of AS grade!

  5. Activity ES4.1 • Carry out titration • Put your results on the board • Use the booklet to help write your results

  6. The question: 10.0 cm3 of a solution of potassium hydroxide was titrated with a 0.10 M solution of hydrochloric acid. 13.5 cm3 of the acid was required for neutralization. Calculate the concentration of the potassium hydroxide solution. Step 1 Write down everything you know from the question. I put the one we know most about on the left Hydrochloric Acid                                 Potassium hydroxide Volume used = 13.5 cm3                     Volume used = 10.0 cm3 Concentration = 0.10M                         Concentration = TBD

  7. Step 2 Write the BALANCED equation (or as much as you know about it).  HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l) This is necessary to check out the ratios of reactants – in this case 1:1 so we don’t have to worry about any ratios. Step 3 Calculate the Number of Moles used of the reactant you know most about. In this case the HCl(aq) The rule here is ; Number of Moles = concentration

  8. Step 3 Calculate the Number of Moles used of the reactant you know most about. In this case the HCl(aq) The rule here is ; Number of Moles = volume × concentration Never do cm3!

  9. Step 4 Work out how many moles of the unknown you have used, this is where you may need to multiply up or down the number of moles, so if 1 mole of HCl needed 2 mol of potassium hydroxide, then at this point you would multiply the number of moles of HCl by 2. In this case this is unnecessary. Number of moles of HCl = 0.0014 mol Number of moles KOH = 0.0014 mol – they react in a one to one ratio

  10. Step 5  Work out the concentration of the potassium hydroxide. Moles of KOH (same as HCl as 1:1) – 0.0014 Volume (q) 10cm3 Concentration = 0.14 M Number of Moles = volume × concentration

  11. CH3COOH + NaOH  H2O + NaOOCCH3 • 0.1M NaOH ? CH3COOH • Volume 6cm3 10cm3 • Balance equation • No. moles = Vol dm3 x conc. • ? = (6/1000) x 0.1Moles dm-3 • ? = 6 x 104 Moles • 1:1 ratio thus 6 x 104 Moles of acid • So Conc = Moles/vol dm3 = 6 x 10 4 / (10/1000) • = 0.06 Moles dm-3

  12. Demonstrate Deduce the concentration of hydrochloric acid if 20.0cm3 is neutralised by 25.0cm3 of sodium hydroxide at 0.2oo moldm-3?

  13. Review Carry out a titration? Confident with procedure? Confident with calculations? What to do if you’re not?

  14. Home Learning Best Choice – Salters A level / ES Formula, equations, amount / Titrations and titration calculations Next lesson is halogen production conference – have poster with you and all 15.1-6 qs + ready to speak

More Related