1 / 13

EJMA & NASTRAN: Checking Finite Element Simulation Results for Pressure & Axial Loads

This presentation compares calculations from the EJMA manual in Section 4.13 with NASTRAN results. Slides cover calculations for different thicknesses (t), widths (w), and loads (q). Data on coefficients used in calculations is also presented. The focus is on fatigue life estimation for combined axial and pressure loads. Refer to slide #2 for "St" values.

edith
Télécharger la présentation

EJMA & NASTRAN: Checking Finite Element Simulation Results for Pressure & Axial Loads

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Final_ EJMA.ppt

  2. EJMA vs. NASTRAN Calculations Used to check the Finite Element simulation

  3. Results From Pressure and Axial Loads only Equations are from Section 4.13 of the EJMA manual Slides #3 and #4 present calculation for , t = .02, w = 1.095, q = 1.0 inches Slides #5 and #6 present calculation for , t = .025, w = 1.095, q = 1.0 inches Slides #7 and #8 present calculation for , t = .03, w = 1.095, q = 1.0 inches Slides #9 to #11 present data for various coefficients which are used in the above calculations.

  4. EJMA Fatigue Life estimate for combined Axial and Pressure loads only See slide #2 for “St” values

More Related