1 / 9

Thermodynamics I

Thermodynamics I. Fall 2004 Course # 59:009 Chapter 9, Section 2 Professor Ratner. Outline. Air Standard Internal Combustion Cycles Otto Cycle Diesel Cycles Analysis of Both Cycles. 9.2 IC Engine Cycles. Generalized IC engine power diagram. 4 parts to the cycle: Intake Compression

Télécharger la présentation

Thermodynamics I

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Thermodynamics I Fall 2004 Course # 59:009 Chapter 9, Section 2 Professor Ratner

  2. Outline • Air Standard Internal Combustion Cycles • Otto Cycle • Diesel Cycles • Analysis of Both Cycles

  3. 9.2 IC Engine Cycles Generalized IC engine power diagram. 4 parts to the cycle: • Intake • Compression • Power • Exhaust Stable (continuous power) operation requires at least 4 cylinders.

  4. Otto Cycle, spark plug ignition: 9.2 Otto Cycle (Gasoline Engines) Qin Qout

  5. 9.2 Diesel Cycle Diesel cycle, ignition by compression: Qin Qout

  6. Otto (gasoline) engines are spark ignited at the smallest internal volume (TDC). Diesel engines auto-ignite due to compression, ideally also at TDC. Otto cycle fuel injection takes several possible forms. 9.2 Analysis of IC Engine Cycles

  7. 9.2 Analysis of IC Engine Cycles An Ideal representation of diesel engine (based on compression ignition) has the following assumptions: 1. heat addition occurs at constant pressure 2. closed system consisting of four reversible processes: (1) isentropic compression, (2) isobaric heat addition, (3) isentropic expansion, (4) constant volume heat rejection. Since only process 2-3 is different from the Otto cycle, let us consider the energy analysis for this process.

  8. 9.2 Analysis of IC Engine Cycles Qin Energy input comes in the form of heat addition, process 2-3. While work produced in process 3-4 as the cylinder volume expands. Hence: Qout

  9. 9.2 Analysis of IC Engine Cycles m∆u = Q - W W12/m = u2-u1 >0 W34/m = u3-u4 >0 Q41/m = u4-u1 >0 η = 1 - Qout/Qin = 1 - (u4 - u1)/(h3 - h2) rc = V3 / V2, is called the cutoff ratio Note that the compression ratio = r = V2 / V1 The mean effective pressure (mep) is defined as an average pressure that Wcycle= mep×displacement volume. For reciprocating engines of comparable size, a larger mep is an indication of better performance in terms of power produced at the same rated speed. With the same compression ratio, Otto cycle is more efficient than Diesel cycle.

More Related