1 / 12

IEEE 802.16

IEEE 802.16. Preliminaries. IEEE 802.16 defines the WirelessMAN air interface specification for wireless metropolitan area networks (MANs) It will facilitate broadband wireless access Designed for point-to-multipoint broadband access applications using roof-top or tower-mounted antennas

elden
Télécharger la présentation

IEEE 802.16

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. IEEE 802.16

  2. Preliminaries • IEEE 802.16 defines the WirelessMAN air interface specification for wireless metropolitan area networks (MANs) • It will facilitate broadband wireless access • Designed for point-to-multipoint broadband access applications using roof-top or tower-mounted antennas • Addresses the need for very high bit rates • Types: • 802.16.1: air interface for 10-60 GHz • 802.16.2: Coexistence of broadband wireless access system • Air interface for licensed frequencies: 2-11 GHz

  3. Services • Digital audio/video multicast • Digital telephony • ATM • Internet Protocol • Bridged LAN • Back-haul

  4. Physical Layer • 10-16 GHz: • Line of sight propagation • The BS transmits a TDM signal with individual subscriber stations (SSs) allocated time slots serially • Access in uplink direction is by TDMA • Both TDD and FDD are used for uplink/downlink • 2-11 GHz (802.16a): • Includes both licensed and unlicensed spectra • Non line-of-sight (NLOS) operations • Use of OFDM

  5. MAC • Service Specific Convergence Sublayer: interfaces to higher layers • ATM convergence sublayer • Packet convergence sublayer • Common Part Sublayer • Privacy Sublayer • Protocol based on privacy key management (PKM) built around the concept of security associations

  6. Common Part Sublayer • A central BS handles multiple independent sectors • On the downlink, data to SSs are multiplexed in TDM fashion. The uplink is shared between SSs in TDMA fashion • MAC is connection oriented – provides a mechanism for requesting bandwidth, associating QoS and traffic parameters, transporting and routing data to the appropriate convergence sublayer, and other actions • Connections are referenced with 16-bit connection identifiers (CIDs)

  7. Connections • Upon entering the network, the SS is assigned three management connections in each direction • Basic connection: used for transfer of short, time-critical MAC and radio link control messages • Primary connection: used to transfer longer, more delay-tolerant messages such as those used for authentication and connection set-up • Secondary connection: used for transfer of standards-based management messages such DHCP, TFTP, and SNMP • SSs are allocated unidirectional transport connections for contracted services • Additional connections are reserved for other operations, such as contention-based access, broadcast, multicast, etc.

  8. Radio Link Control • RLC begins with periodic BS broadcast of burst profiles that have been chosen for the uplink and downlink • Downlink Interval Usage Code (DIUC) • Uplink Interval Usage Code (UIUC) • During initial ranging, the SS also requests to be served in the downlink via a particular burst profile by transmitting its DIUC • After initial determination of uplink/downlink burst profiles, RLC continues to monitor and control burst profiles

  9. Uplink Scheduling Services • Each connection in the uplink direction is mapped to a scheduling service • Each scheduling service is associated with a set of rules imposed on the BS scheduler

  10. Types of Services • Unsolicited Grant Service (UGS): for services that generate fixed units of data periodically • The BS schedules regularly grants of size negotiated at connection set-up • Real-time Polling Service: for services that are dynamic in nature, but offers periodic dedicated request opportunities to meet real-time requirements • Well-suited for VoIP, streaming audio/video • Non-RT Service: almost identical to RT polling service except that connections may utilize random access transmit opportunities for sending bandwidth requests • Best effort service: No guarantees

  11. Channel Acquisition • Upon installation, an SS begins scanning its frequency list to find an operating channel. • It may be programmed to register with a specified BS, referring to a programmable BS ID broadcast by each • After deciding on which channel to attempt connection, the SS tries to synchronize to the downlink transmission by detection periodic frame preambles • Other steps: • Initial ranging and negotiation of SS capabilities • SS authentication and registration • IP connectivity (obtains IP address through DHCP)

  12. Connection Setup • IEEE 802.16 uses the concept of service flows to define unidirectional transport of packets on either downlink or uplink • To utilize the network resources most effectively, IEEE 802.16 adopts a 2-phase activation model in which resources assigned to a particular admitted service flow may not be actually committed until the service flow is activated • Each admitted or active service flow is mapped to a MAC connection with a unique CID • Service flows are pre-provisioned, and setup of the service flows is initiated by the BS during SS initialization • Dynamic service establishment and dynamic service changes are also supported

More Related