1 / 18

MAGNETOSTRICTIVE PUMP

MAGNETOSTRICTIVE PUMP. ENME 444 UMBC Department of Mechanical Engineering Faculty Sponsor: Dr. Anjanappa Faculty Advisor: Dr. Assakkaf Aaron Caprarola Charles Steinert Danny Bhatti Dave Ohler December 7, 2006. ABSTRACT.

emiko
Télécharger la présentation

MAGNETOSTRICTIVE PUMP

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MAGNETOSTRICTIVE PUMP ENME 444 UMBC Department of Mechanical Engineering Faculty Sponsor: Dr. Anjanappa Faculty Advisor: Dr. Assakkaf Aaron Caprarola Charles Steinert Danny Bhatti Dave Ohler December 7, 2006

  2. ABSTRACT • Design and development of a high speed and precision magnetostrictive fluid pump • Design a pump operating at up to 10,000 Hz that functions using magnetostrictive properties of terfenol-d. • Large volumes are enabled by the high frequency displacement • Summarize accomplishments!!!!

  3. INTRODUCTION • What is magnetostriction? • Ferromagnetic materials displace in proportion to magnetic field • Causes ‘hum’ around electrical equipment • Regular metals have a strain around 10^-6 • High performance materials (like terfenol-d) have strain around 10^-3 • We can use this displacement to pump fluid

  4. INTRODUCTION • Boundaries: • Resolution of 10mL • Operating temperatures: 23-27°C • Max. dispensing speed: 100mL/ms • Frequencies up to 10KHz • Supply fluid: Gravity fed reservoir • Dispensing volume: 10mL – 100mL

  5. PLANNING • Tasks: • Market Research • Design Magnetostrictive Pump • Design Pumping Mechanism • Design Control system • Manufacturing Process/CAD Drawings

  6. Gantt Chart/Schedule: PLANNING

  7. PLANNING • Circuit Diagram/Critical Path:

  8. PLANNING • Deliverables: • Design • Manufacturing Drawings • References

  9. PLANNING • Time Estimate • A = Constant as a function of company size • PC = Project Complexity • D = Project Difficulty • J = Level in Function Diagram • F = Number of functions at a given level

  10. PLANNING • Time Estimate of 105 hours • Statistical Time Estimate of 108 hours Pump Liquid Pump for a specific Amount of Time Pump at a precise Flow rate

  11. DESIGN

  12. DESIGN

  13. DESIGN

  14. DESIGN

  15. DESIGN

  16. IMPACT STATEMENT • Dispensing accurately metered quantities of fluid is critical for applications in the area of pharmaceutical, biotechnology and aerospace applications. • Small quantities of fluid at high frequencies are most suitable for Bio MEMS devices.

  17. CONCLUSION

  18. REFERENCES • Mcmasters, O.D.,”Performance of Magnetostrictive TbxDz1-xFey (Terfenol-D) Transducer Elements Optimized to meet Device/Applications Requirements” • Wise, E.M.,”Magnetostriction: a new design tool”. Product Engineering, p.162-166, 1957 • Chang,C.,”Theory and Design of a Magnetostrictive Actuator,” M.S. Thesis, Clemson University, 1971 • Goodfriend, M.J. and K.M. Shoop, ‘Adaptive Characteristics of the Magnetostrictive Alloy, Terfenol-D for Active Vibration Control’,J. of Intell. Mater. Syst. And Struct., Vol.3, p.245-255, April 1992 • Minivalve Cooperation, Yellow Springs, Ohio, www.minivalve.com.

More Related