1 / 11

Network Camera Latest Firmware feature -- 2013.12

Network Camera Latest Firmware feature -- 2013.12. Firmware. Latest Version-- V2.212 Multiple nonrectangular areas motion detection with different colors Multiple Browsers supported Onvif profile S V12.12 test tool passed New API protocol V1.37

eris
Télécharger la présentation

Network Camera Latest Firmware feature -- 2013.12

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Network Camera Latest Firmware feature-- 2013.12

  2. Firmware • Latest Version-- V2.212 • Multiple nonrectangular areas motion detection with different colors • Multiple Browsers supported • Onvifprofile S V12.12 test tool passed • New API protocol V1.37 • Dahua Digital Signature(Dahua firmware only) • No clip between mainstream and substream • Add location in Overlay • One version , All HX3(2)XX cameras

  3. Motion Detection • 4 independent nonrectangular detection areas with different colors • Each area has independent parameters, including name, sensitivity, threshold. • Each region’s name will shown in the log when motion occurs.

  4. API protocol • Key feature • Take extra-stream snapshot over HTTP command • Holiday schedule setting over HTTP protocol • Software version query over API protocol • Set locationin Overlay

  5. Onvif Profile S • Onvif profile S conformance • Support camera setting • Motion detection • Device capacity detection • Integration with most of software platforms easier • V12.12 test tool passed

  6. Dahua Digital Signature Do not active the alarm from explorer that our firmware isn’t trusted.

  7. No clip 720P mainstream No clip between the mainstream and substream, same view angle at horizontal and vertical. D1 substream

  8. Location • Support location in Overlay tab

  9. Support models Firmware 2.212 supports all IPC-HX3(2)XXX and IPC-K100(A)(W) camera models. Need new FPGA to fix the image issue

  10. Fix bugs • Better 3DNR • Better WIFI performance • Optimize PIR detection (for IPC-K100 series) • Fix the issue of FTP multi-level directory • Fix the issue that the speaker of K100 would burnout • Fix the DHCP to standard mode, more reliable • Support same IP segment with LAN and WLAN

  11. THANK YOU! www.dahuasecurity.com

More Related