1 / 11

ECE 5233 Satellite Communications

ECE 5233 Satellite Communications. Prepared by: Dr . Ivica Kostanic Lecture 11: Satellite link design (Section 4.4). Spring 2014. Outline . Rain attenuation and system noise temperature Uplink link budget calculations.

essien
Télécharger la présentation

ECE 5233 Satellite Communications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ECE 5233 Satellite Communications Prepared by: Dr. Ivica Kostanic Lecture 11: Satellite link design (Section 4.4) Spring 2014

  2. Outline • Rain attenuation and system noise temperature • Uplink link budget calculations Important note: Slides present summary of the results. Detailed derivations are given in notes.

  3. Effect of rain on the noise temperature System temperature Temperature of the Universe Temperature of the atmosphere

  4. Effect of rain on the noise temperature Clear sky Rainy sky Coupling efficiency Change in the noise level due to rain

  5. Uplink power budget • In fixed satellite systems – usually easier • Transmission is to a single location • On the ground - much more power • In mobile systems – usually harder • Small transmit power from the ground (usually ~1 watt) • Various trade offs involved with the uplink are examined through proper power budget • Four sections of the budget: • Ground transmit (PA, antenna requirements) • Satellite receive (linear gain of transponder, antenna requirements) • Propagation path losses (FSPL, elements, margin) • Reliability calculations and margins

  6. Combination of C/N At the transponder RX • Bent pipe transponder amplifies both signal and noise • As the signal travels through the chain the noise is accumulated • On board processing transponder removes input noise At the transponder TX At the earth station RX Note: the noise at the RX has a portion that originated at the transponder input

  7. Combination of C/N (2) S/N at the receiver Useful rules of thumb • If two C/N values are equal output C/N is 3dB lower • If two C/N differ by 10dB, output C/N is 0.4 below the lower of the two • If C/N differ by 20dB, output C/N is essentially the same as the lower of the two Generalization

  8. Side-lobe envelope of the transmit antenna • Specification on side-lobe of ground antenna that minimizes interference on the UL • Adopted by ITU-R to allow 2 degree spacing in the geo-stationary arc Note: maximum antenna gain towards the neighboring satellite space is 21.5dB This is still significant gain and coordination is frequency coordination may be required between operations in adjacent slots

  9. Example 4.6.1 Consider a transponder in Ku band with linear gain of 127dB and nominal power at saturation of 5W. The satellite’s antenna has a gain of 26dB on axis. Calculate output power required from a ground PA if following data are known: frequency of operation 14.45GHz, Earth station gain of 50dB, antenna feed losses -1.5dB, atmospheric losses of 0.5 dB, rain margin 7dB, off axis satellite antenna losses -2dB. Answers: Required power at the satellite: -127dBW Environmental losses: 214.85dB Transmit power: 44.15dBm (26W) (review attached spreadsheet) Note: the power requirement at the satellite are relatively low. Assuming noise temperature of 300K, and noise bandwidth of 27MHz, the maximum theoretical bandwidth efficiency would be 1.5bps/Hz

  10. Example 4.5.1 Estimate decrease in C/N at the receiver if the atmospheric losses due to rain increase by 3dB. In clear sky the atmospheric losses are 0.4dB and the equivalent system noise temperature is 145K. The coupling efficiency is 0.95 Answers:

  11. Example 4.7.1 Thermal noise at the earth station results in S/N is 20.0dB. A signal is received from a bent pipe transponder with C/N of 20dB. What is the value of the overall C/N at the earth station? If the C/I ratio of the IM distortion at the transponder is 24dB, what is the overall C/N ratio at the earth station? Answers: • C/N = 17dB • C/N = 16.2dB

More Related