1 / 15

Organic scintillators – light yield

Organic scintillators – light yield. Attenuation lengths are sensitive to optical clarity, surface quality (internal reflection) and impurities often deal with >meter lengths of scintillators, so these optical effects are important Aging and crazing (microcracks in surface) diminish light yield

fawzi
Télécharger la présentation

Organic scintillators – light yield

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Phys 521A

  2. Organic scintillators – light yield • Attenuation lengths are sensitive to optical clarity, surface quality (internal reflection) and impurities • often deal with >meter lengths of scintillators, so these optical effects are important • Aging and crazing (microcracks in surface) diminish light yield • Radiation damage is complex; it affects both light yield and attenuation Phys 521A

  3. Examples of organic scintillators • Tiles are usually wrapped in reflective material and light-tight tape • Light guide to couple to PMT • Fiber readout also used Phys 521A

  4. Phys 521A

  5. Phys 521A

  6. Phys 521A

  7. Inorganic scintillators • Higher densities, lower light yields relative to organics • Crystals – slow and expensive to grow • Light collection efficiency – optical transparency, surface quality, scattering centres • Signal develop-ment can be slow; 100s of ns organic ~1 ~40 ~2 ~80 ~2 tune ~25 no Phys 521A

  8. Phys 521A

  9. Examples of inorganic scintillators BaF2 CsI(Tl) NaI(Tl) Lead Tungstate Phys 521A

  10. Ionization chambers Phys 521A

  11. Phys 521A

  12. Phys 521A

  13. Phys 521A

  14. Charge transport in gases • Recall primary/total ionization (nT ~ 2-3 x nP) • Distribution of ejected electrons ~ 1/E2 (E=electron energy) • Ionization clusters form around energetic secondary electrons; can degrade time and position resolution Probability of producing an electron of energy≥E (left scale), and range of electrons inArgon at NTP (right scale) Phys 521A

  15. Drift velocity • Liberated electrons accelerated by applied field, but have small mean-time-between-collisions τ, sovd = e E τ / m << vrms (think Ohm’s law) • More sophisticated model (ω = Larmor freq eB/m): • Drift velocity depends on τ, i.e. on collisional cross-sections; very sensitive to gas mixture, contaminants • ExB force causes “Lorentz angle” (see above); Phys 521A

More Related