1 / 23

15 Minute Math Labs

15 Minute Math Labs. Finding the Height of a Cone. Finding the Height of a Cone. Purpose: Find the height of a cone of which an ordinary party cup is a section. Finding the Height of a Cone. Purpose: Find the height of a cone of which an ordinary party cup is a section.

fidella-lerato
Télécharger la présentation

15 Minute Math Labs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 15 Minute Math Labs Finding the Height of a Cone

  2. Finding the Height of a Cone Purpose: Find the height of a cone of which an ordinary party cup is a section.

  3. Finding the Height of a Cone Purpose: Find the height of a cone of which an ordinary party cup is a section.

  4. Finding the Height of a Cone Purpose: Find the height of a cone of which an ordinary party cup is a section. Math principles: Similar triangles, ratios, solving a linear equation, reading a ruler

  5. Finding the Height of a Cone

  6. Finding the Height of a Cone Looking at the big picture: Shown here with extended lines is the cone for which we are to find the height (depicted here with a question mark).

  7. Finding the Height of a Cone Looking at the big picture: Shown here with extended lines is the cone for which we are to find the height (depicted here with a question mark). The dimensions D1, D2, and H1 will ultimately be applied to the sides of two similar triangles from which the final calculations will be made. However, we must first obtain these measurements as follows:

  8. Finding the Height of a Cone

  9. Finding the Height of a Cone Measure small diameter With the cup turned upside down, measure the small inside diameter (D1) of the cup. The actual measurement is marked with an arrow on the ruler in this picture.

  10. Finding the Height of a Cone

  11. Finding the Height of a Cone Measure large diameter Next, with the cup upright, measure the large inside diameter (D2).Notice the cup is flared slightly at the top, so reduce the inside diameter by .2cm.

  12. Finding the Height of a Cone

  13. Finding the Height of a Cone Measure the height Finally, measure the height of the cup (H1). Be sure to measure all the way to the top.

  14. Finding the Height of a Cone The three measurements should be close to the following values D1 = 5.3 cm D2 = 8.5 cm H1 = 7.0 cm

  15. Finding the Height of a Cone

  16. Finding the Height of a Cone Final calculation: From the two similar triangles, set up a proportion

  17. Finding the Height of a Cone Final calculation: From the two similar triangles, set up a proportion

  18. Finding the Height of a Cone Final calculation: From the two similar triangles, set up a proportion Cross multiply, substitute in the values obtained for D1, D2, and H1 and get: .5(8.5)X = .5(5.3)(7+X)

  19. Finding the Height of a Cone Final calculation: From the two similar triangles, set up a proportion Cross multiply, substitute in the values obtained for D1, D2, and H1 and get: .5(8.5)X = .5(5.3)(7+X) Solve for x and get X = 11.59

  20. Finding the Height of a Cone Final calculation: From the two similar triangles, set up a proportion Cross multiply, substitute in the values obtained for D1, D2, and H1 and get: .5(8.5)X = .5(5.3)(7+X) Solve for x and get X = 11.59 Height of the cone = X + H1

  21. Finding the Height of a Cone Final calculation: From the two similar triangles, set up a proportion Cross multiply, substitute in the values obtained for D1, D2, and H1 and get: .5(8.5)X = .5(5.3)(7+X) Solve for x and get X = 11.59 Height of the cone = X + H1 = 11.59 + 7

  22. Finding the Height of a Cone Final calculation: From the two similar triangles, set up a proportion Cross multiply, substitute in the values obtained for D1, D2, and H1 and get: .5(8.5)X = .5(5.3)(7+X) Solve for x and get X = 11.59 Height of the cone = X + H1 = 11.59 + 7 = 18.59 cm

  23. 15 Minute Math Labs Finding the Height of a Cone

More Related