1 / 28

Hydro-Québec's experience with High Voltage XLPE insulated Cable Systems

Hydro-Québec's experience with High Voltage XLPE insulated Cable Systems. Ray Awad Alex Canaan Christian Royer Pirelli Pierre Boyer Martin Choquette Raphaël Gignac Jean-Luc Parpal Hydro-Québec. Presentation outline. Introduction

fionan
Télécharger la présentation

Hydro-Québec's experience with High Voltage XLPE insulated Cable Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Hydro-Québec's experience with High Voltage XLPE insulated Cable Systems Ray Awad Alex Canaan Christian Royer Pirelli Pierre Boyer Martin Choquette Raphaël Gignac Jean-Luc Parpal Hydro-Québec

  2. Presentation outline • Introduction • Hydro-Quebec underground transmission system • HV XLPE insulated cable and accessories technology • Main steps in technology switch • First 120 kV cable project • 230kV and 315 kV cables • Cost reduction solutions • Partnership agreement • New cable system design • Civil work • First project using the new cable system • Conclusion • Question period

  3. Hydro-Quebec Underground HV Transmission System

  4. Territoire Est 3 lignes 69 kV – 8.2 km 14 lignes 315 kV – 6.0 km Territoire Ouest 74 lignes 120 kV- 132.1 km 4 lignes 315 kV - 7.9 km Territoire Sud 80 lignes 120 kV – 25.4 km 10 lignes 230 kV - 3.6 km 1 ligne 450 kV - 5.5 km

  5. The rate of increase in the underground HV Cables

  6. HV XLPE insulated Cable Technology switch from Oil Filled to XLPE • In 1987 Hydro Quebec decided to use XLPE insulated cables for the 120 kV underground network • Techno-economical studies showed that cost of new lines will be reduced by 15% ; • Maintenance cost will be reduced by 50% • Three new projects were planned for in service dates between 1990 and 1991

  7. The main steps • Qualification testing of the new cables • Rethinking of the design parameters (cables, accessories and installation); ducts, joints arrangement and anchoring etc. • Purchasing of new tools • Training of Hydro Quebec splicers on actual cables and accessories • New policy on cable and accessories spare materials

  8. First 120 kV Cable Project • 120 kV, 5,2 km between Belanger and Rosemont SS in Montreal • Cable : • 1600 MCM (811 sq.mm), Cu. Conductor, • Isulation thickness 21,6 mm • Metallic sheath: lead alloy • Outer sheath: Black Polyethylene with graphite coating • Accessories : • Joints: Premoulded, sectionalized with copper casing and outer heat shrinkable sleeves and tapping • Potheads: Premoulded stress cones and porcelain

  9. First 120 kV Cable project • Average cable length: 350 m • Cross Bonding System: Transposition with Zinc Oxide lightning arresters • Installation: • Cables in ducts and joints in manholes (rigidly clamped) • Cables were produced using Triple extrusion and DRY CURING process

  10. 230 kV and 315 kV XLPE cables • Nine 230 kV new circuits were added in 1991-1992 at a thermal power station • Qualification testing on the 315 kV (400 kV class) were carried out in 1995-1996 • On supplier qualified his cables for 500 kV class • First project is planned for 2004

  11. Cost reduction the new challenge • In 2000, Hydro Quebec strategic plan (2000-2004) requested that underground HV cables should be made more competetive with OHTL • Cost reduction was in order

  12. Cost reduction solutions

  13. Cost breakdown in a standard 120 kV project Engineering 7% Other 22% Procurement 35 % Cable Installation 11 % Civil work 25 %

  14. Cost reduction solutions 36 solutions were evaluated • Close interactions between solutions • Local regulations were taken into consideration • Mid term and long term solutions are still under consideration

  15. Cost reduction solutions, main categories • Procurement : Changes in cable design (lighter cables, longer lengths, reduced insulation thickness etc.) • Civil work : Introducing prefabricated joint bays • Other costs : Reduction of project duration from three years to 18 months

  16. Partnership agreement

  17. Partnership agreement • Development of new cable design • Reduction of eprocurement lead time • Optimal design, engineering and installation • Reduction of strategic spare material

  18. New cable system design

  19. New cable system design

  20. Qualification testing • Bending test • PD measurement • Tan d measurement • 30 cycles at 150 kV • Hot impulse 650 kV BIL (10 +, 10-) • AC 230 kV, 1 hour • Impulse and HVAC test to breakdown

  21. Civil work

  22. Civil work • Premoulded Joint bays • Smaller dimensions • Faster instalation • Longer cable lengths allowed • Maintenance free

  23. First project using the new cable system

  24. Mt-Royal/Royalmount 120 kV project • Circuit length 4,2 km • 5 Premoulded joint bays • Average length between bays 700 m (was 350 m) • 1 new transition compound (OHTL to UG) • Total project duration 11 months for procurement, construction and commissionning

  25. Cost reduction achieved

  26. Breakdown of cost of first project using new cable system Engineering 7% Others 22% 27% reduction Procurement 35 % 34% reduction Cable Installation 11 % 16% reduction Civil works 25 % Économie de 27% Global cost reduction 25%

  27. CONCLUSION • XLPE insulated high voltage cables are reliable, environnment friendly, easy to install and maintain • Performance record (over 14 years) has been very satisfactory • Cost reduction is possible by rethinking of cable and accessories design as well as installation technique selection

  28. Questions ?

More Related