1 / 6

Fix HP LaserJet Pro M1132 Error Code E8

If you own the HP LaserJet Pro M1132 and suddenly the E8 error light starts flashing on your printers, it simply means the problem is with the scanner carriage

gadgetsick
Télécharger la présentation

Fix HP LaserJet Pro M1132 Error Code E8

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Fix HP LaserJet Pro M1132 Error Code E8

  2. HP LaserJet Pro M1132 If you own the HP LaserJet Pro M1132 and suddenly the E8 error light starts flashing on your printers, it simply means the problem is with the scanner carriage. The error can be due to any reason, like a software-based or broken scanner motor connection.

  3. What is the reason for the error code E8? HP error code E8 is a warning error. The reason for the error could be software-based or the trouble is the motor itself. Another factor that contributes to this error code is dust has been collected on the sensitive mechanical arms which leads to gentle movement and eventually carriage is stalled and the printer is freeze.

  4. Follow the steps below for the Error code e8 • First, you need alcohol and a rag to clean the printer. Now, place the printer in a well-ventilated area. Take a screwdriver and open printer parts. • Detach the top and inner lid of the printer to open more. • Open the ink cartridge lever and pull it out while holding the handle. • Dip the rag in alcohol to clean the roller before it unclips the printer roller from its holder. Now clean it thoroughly with the damp rag. • Let the roller get dry before clipping it back to the printer holder. • Clip the roller back to the printer holder and as the roller positioned back it should produce a distinct click which means it’s correctly reinstalled. • Move the printer sideways and look for jack at the back of the printer. After that pull the jack out by removing the nuts. • Thoroughly clean the printer roller and reinstall back the jack with nuts. •  Reinstall the ink cartridge properly before closing the printer. • Now, close the printer and turn on. Error still pops, then applies some oil in the driver’s gear after the scanner cover is open. •  Lastly, switch the printer on again and check.

  5. Error Not Fixed? After performing the above-mentioned troubleshooting step error continuing then all you need to do is to call HP Printer Customer Support Service immediately. Gadgetsick is a team of trained HP Printer experts who are just a call away! Once you place a call, your issue will be taken care of with the best possible resolution. No matter how complex the issue is we are experienced and well equipped to take care of your printer’s health.

  6. Click to Visit: http://www.gadgetsick.com/ Or Call Us At (888-358-6248)

More Related