1 / 2

REAMERS

½” press fit hole. ½” slip fit hole. REAMERS. Purpose: Use a reamer to refine the size of a pre-drilled hole, accurate to ±0.0003 inches. Reamers can be used for press fit and slip fit holes. Read more from Chadwick Reamers. Gray Shop Toolbox. Tips for use:

garin
Télécharger la présentation

REAMERS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ½” press fit hole ½” slip fit hole REAMERS Purpose:Use a reamer to refine the size of a pre-drilled hole, accurate to ±0.0003 inches. Reamers can be used for press fit and slip fit holes. Read more from Chadwick Reamers Gray Shop Toolbox • Tips for use: • Check the quality of the Reamer before and after use for damage, as it is a very precise tool. • For hole sizes less than ½ inch, drill 1/64 inch less than reamer size. • For hole sizes greater than ½ and less than 1 inch, drill 1/32 inch less than reamer size. • For holes greater than an inch in diameter, it is more accurate to use a boring tool than a reamer. • Ream at ½ of the Drilling RPM. • Use plenty of machine oil. • Ream with a steady, slow plunge rate. • Adjustable and taper reams are also available.

  2. REAMERS SIZES

More Related