Physics 221 Department of Physics The Citadel Lecture Notes S. Yost November 17, 2008

1. Physics 221Department of PhysicsThe CitadelLecture NotesS. YostNovember 17, 2008 Hydrostatics: Pressure and Pascal’s Law

2. Virtual Lecture • This is a virtual lecture. It contains the notes that would have been used in class, together with some conceptual WebAssign problems to check your understanding. • This should be read in parallel with the Virtual Lecture WebAssign Set, which is open only until 5PM Monday afternoon. • Attendance will be taken from the WebAssign access log for this set. Answers to the questions contribute to your homework score.

3. Today’s Topics • Hydrostatics: • Pressure, Pascal’s Law • Read Chapter 14, sections 1 – 3. • Wednesday, Prof. Rambiesa will substitute and discuss sections 4 – 5 on buoyancy and the continuity equation. • Problem Set 13 is due Wednesday night. • Problem Set 14 is due Monday, Dec. 1.

4. Fluids • The laws governing fluids are often outside of every-day experience, and our intuition sometimes can lead us astray. • Please read the derivations to the book –The subject will make more sense if you try to understand the physics behind the equations. • Everything has a basis in Newton’s laws.

5. Pressure in a Fluid Pressure is force per unit area on a surface: P = F/A where A is the surface area, and only the force perpendicular to the area counts. If I put draw a box enclosing a bit of fluid in equilibrium, there is a downward force on the top of the box, F = PA. What is this force? h F A box drawn around some fluid

6. Pressure in a Fluid The force is the weight of all the water on top (plus the force due to the atmosphere, but for now, assume the water is in a vacuum). The weight of the water is F = rghA, so the pressure is P = F/A = rgh where r is the density of water, 1000 kg/m3. h F A box drawn around some fluid

7. Pressure in a Fluid The pressure is the same at any point at the same depth. Otherwise, there would be different forces on the sides of the box – it wouldn’t be in equilibrium. This result generalizes to any point in the fluid: P = rgh. h F F box drawn around some fluid

8. Pressure in a Fluid For example… The pressure on the bottom of the box is the weight needed to hold up a column of water of height d + h. Therefore, F1 = rghA on top, and F2 = rg(h+d)A on the bottom. The pressure difference between the bottom and top of the box of water is P2 – P1 = rgd. This pressure difference supports the weight of the box of water, which is mg = rgAd. h F1 A d F2 mg

9. Pressure in a Fluid This implies that when you descend a distance Dy = -d, The pressure increases by DP = rgd = -rgDy, or, in calculus terms, dP/dy = - r g. If the density is independent of the depth (incompressible fluid), this gives P = rgh. Sign convention: y is positive upward on this slide. y h F1 A d F2 mg Answer WebAssign Questions 1 and 2.

10. Water behind a Dam • Suppose I have two reservoirs, both of the same depth and width, but one holding a lake 2 miles long, and the other holding a lake 20 miles long. • Which dam has more force on it? Try WebAssign Question 3. If you get it wrong, Read the next slide before trying again. The depths are the same.

11. Water Behind a Dam It doesn’t matter: The pressure on the dam at depth h is rgh in either case. This means the force on the dam is the same. • The same would be true if the dam just held back an inch of water!

12. Different shaped Vessels • Which of these vessels, filled with the same depth of water and with the same base area, has the greater force on the base? Vessels with bottoms of equal area.

13. Different shaped Vessels • The force on the base is the same in each case, even though the mass of water in each container is different. The pressure only depends on the depth of the water. F = rghA. h h h h A A A A

14. Atmospheric Pressure The weight of the air above us produces atmospheric pressure at sea level equal to 1 atm = 1.013 x 105 N/m2. Pressure is also measured in Pascals: 1 Pa = 1 N/m2. Pressure gauges are normally set to zero when only atmospheric pressure is present. Gauge pressure is defined as the additional pressure beyond that due to the atmosphere. The total pressure including atmospheric pressure is called the absolute pressure.

15. Swimming Pool For example, at the bottom of a 2m deep swimming pool, the gauge pressure is Pgauge = rgh = (1000 kg/m)(9.8 m/s2)(2m) = 1.96x104 Pa. The absolute pressure is Pabs = Pgauge + 1 atm = 1.227x105 Pa.

16. Swimming Pool What is the total force of the water on the side of the pool, if it is 10 m wide and 2 m deep? The water’s pressure P(y) = rgy increases linearly with depth, so the average pressure on the wall is Pavg = ½ Pbottom= 9800 Pa, and the total force on the wall is F = Pavg A = 9800 Pa x 20 m2 = 1.96x105 N. y P(y) y=2m

17. Suction Pump A negative gauge pressure corresponds to suction. If we produce a negative gauge pressure on a straw, water will be “sucked” up the straw. P < Patm h

18. Suction Pump What is the highest a suction pump can draw water up a tube? You will have to think about what force is actually causing the water to go up the tube. P < Patm h Try WebAssign Question 4. Read the next slides if you need help.

19. Suction Pump The absolute pressure in the tube can’t be reduced to less than 0, so the maximum pressure difference between the bottom and top is 1 atm. It is important to realize that it is the atmosphere’s pressure that is pushing liquid up a tube when suction is applied. The pump isn’t “pulling” on the fluid. P < Patm h

20. Suction h = The maximum height water can be pumped with a suction pump is then given by rgh = 1 atm = 1.013 x 105 N/m2 with r = 1000 kg/m3 and g = 9.8 m/s2, giving h = 10.3 m. Pump P < Patm h 1.013 x 105 N/m2 (1000 kg/m3)(9.8 m/s2)

21. Hydraulic Lift A hydraulic lift is a simple machine which uses the fact that any fluid pushed into a cylinder on one end must come out the other. V If cylinder 1 is compressed by a volume V, then cylinder 2 must move up a volume V to accommodate the fluid. A2 L2 V A1 L1

22. Hydraulic Lift Since the volumes are the same, the distances the cylinders move is related to their areas: A1 L1 = V = A2 L2. or L2/L1 = A1/A2. V A2 L2 V A1 L1

23. Hydraulic Lift The work done by a force on one cylinder will equal the work done by the other cylinder. F1 L1 = F2 L2. F2 V A2 L2 V A1 F1 L1

24. Hydraulic Lift The ratio of forces is F2 / F1 = L1 / L2 = A2 / A1. This can also be written as F2/A2 = F1/A1 or, since the force per unit area is the added pressure on the system, DP2 = DP1. This is Pascal’s Principle. In words… When an force is applied to a closed vessel, the pressure increases by the same amount throughout the vessel.

25. Pascal’s Demonstration d Pascal demonstrated his principle by inserting a long thin tube of diameter d = 6 mm into a wine barrel of diameter 40 cm. He found that filling the tube to a height of 12 m caused the barrel to burst. h D

26. Pascal’s Demonstration d (a) What was the weight of the water in the tube? m = r (pr2) h = 1000 kg/m3 x (2.8 x 10-5 m2)x 12 m = 0.340 kg. mg = 0.340 kg x 9.8 m/s2 = 3.33 N = 0.75 lb. h h = 12 m r = 0.003 m D

27. Pascal’s Demonstration d What is the pressure at the bottom of the tube? F1= mg = 0.75 lb on area A1= pd2/4= 2.83 x 10-5m2 Gives pressure P = F1/A1 = 2.65 x 104 lb/m2 (Mixed units – but you probably have a better feeling for pounds, so I’ll keep it that way.) h D

28. Pascal’s Demonstration The force on the lid of the barrel is F2 = PA2 with A2 = pD2/4 = 0.126 m2, giving F2 = 3340 lb! The ¾ pound of force of the water is multiplied by the ratio (D/d)2 = 4444. The End Try WebAssign Question 5.