1 / 5

RRM and WLAN-WWAN handovers

RRM and WLAN-WWAN handovers. Lars Falk Telia. Background. Several fora work with handover issues between WLAN and WWAN Even if it is open whether IEEE 802.11 should start active work on such issues, new work items should not prevent them

garrett-rivas
Télécharger la présentation

RRM and WLAN-WWAN handovers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RRM and WLAN-WWAN handovers Lars Falk Telia Lars Falk, Telia

  2. Background • Several fora work with handover issues between WLAN and WWAN • Even if it is open whether IEEE 802.11 should start active work on such issues, new work items should not prevent them • Most likely it will be the terminal that takes the handover decision • The terminal need information about the link layer Lars Falk, Telia

  3. What could be done within RRM? • Open up link layer specific information to upper layers • Provide an API so that upper layers can request or set specific parameters Lars Falk, Telia

  4. Possible parameters • The following list of parameters (probably far from complete) may be helpful for the terminal when taking a handover decision: • Data rate • Error rate • Delay • Delay jitter • Signal strength • All parameters are relevant for max/min/average and downlink/uplink Lars Falk, Telia

  5. Questions • Is the availability of such parameters at the terminal within the scope of RRM? • Is the creation of an API for setting and requesting various parameters within the scope of RRM? • Is the type of parameters listed within the scope of RRM or should they be more 802.11 specific? Lars Falk, Telia

More Related