1 / 3

Introduction -Steel Design

Introduction -Steel Design. Examples 1:. Introduction -Steel Design. Introduction -Steel Design. Examples 1:. Examples 1:. 1.5-1 A 20-foot-long W8 x 67 is suspended from one end. If the modulus of elasticity is 29,000 ksi, a. What is the maximum tensile stress?

Télécharger la présentation

Introduction -Steel Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Introduction -Steel Design Examples 1: Introduction -Steel Design Introduction -Steel Design • Examples 1: • Examples 1: 1.5-1 A 20-foot-long W8 x 67 is suspended from one end. If the modulus of elasticity is 29,000 ksi, a. What is the maximum tensile stress? b. What is the maximum normal strain? • Solution: • Solution: • Maximum normal strain Hooke's low. • The stress is directly proportional to the strain • p=20×67=1340 Ib. • A=1907 in2 .

  2. Introduction -Steel Design • Examples 2: 1.5-3 During a tensile test of a specimen of unknown material, an increase in length of 6.792 x 10-3 inches within the gage length was recorded at a load of 5000 lb. The specimen diameter was 0.5 inch and the gage length was 8 inches. (The gage length is the distance between two marks placed along the length of the specimen.) a. Based on this one data point, what is the modulus of elasticity? b. If the load at fracture was 14,700 lb. what is the ultimate tensile stress? • Solution:

More Related