1 / 17

Geometry

Geometry. 7.1 Rigid Motion in a Plane. Goals. Identify the three basic rigid transformations. Use correct terminology in transformations. Transformations. Reflections Rotations Translations. Transformations. The “original” object is the preimage . The copy is the image. preimage.

gary-watkins
Télécharger la présentation

Geometry

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Geometry 7.1 Rigid Motion in a Plane

  2. Goals • Identify the three basic rigid transformations. • Use correct terminology in transformations. Geometry 7.1 Rigid Motion in a Plane

  3. Transformations • Reflections • Rotations • Translations Geometry 7.1 Rigid Motion in a Plane

  4. Transformations • The “original” object is the preimage. • The copy is the image. preimage image Geometry 7.1 Rigid Motion in a Plane

  5. Translation Preimage Image Geometry 7.1 Rigid Motion in a Plane

  6. Reflection Preimage Image Line of Reflection Geometry 7.1 Rigid Motion in a Plane

  7. Rotation Images Center of Rotation Preimage Geometry 7.1 Rigid Motion in a Plane

  8. Labels • If a preimage point is A, then the corresponding image point is A’. • A’ is read “A prime”. • Preimage ABC is transformed to image A’B’C’. Geometry 7.1 Rigid Motion in a Plane

  9. Reflection A A’ C C’ B B’ Preimage Image Geometry 7.1 Rigid Motion in a Plane

  10. Mapping • A transformation is a mapping. • If RST is translated to XYZ, we say “RST is mapped onto XYZ”. • We write RST  XYZ. Geometry 7.1 Rigid Motion in a Plane

  11. Write the mapping for this diagram. B 90° V T 60° 90° 30° 60° A C 30° ABC  ______ VTN N This mapping is a rotation. Geometry 7.1 Rigid Motion in a Plane

  12. CD  AB  D V T C DA  B S R A VR TV RS ABCD  RSTV SRVT BADC  This mapping is a reflection. Geometry 7.1 Rigid Motion in a Plane

  13. Isometry • Iso = The same • Metry = Measure • Isometry means “The same measure”. Geometry 7.1 Rigid Motion in a Plane

  14. Isometries preserve… • segment length • angle measure • parallel lines • distances • Transformations that are isometries are called Rigid Transformations. Geometry 7.1 Rigid Motion in a Plane

  15. Translations, Reflections, and Rotations are ISOMETRIES. Geometry 7.1 Rigid Motion in a Plane

  16. A A' B C B' C' Are all transformations also isometries? Segment length not preserved. Angle measures not preserved. Orientation is preserved. NO! ABC  A'B'C' Geometry 7.1 Rigid Motion in a Plane

  17. The rest of this chapter will be done by construction methods. Geometry 7.1 Rigid Motion in a Plane

More Related