1 / 8

Loose End Message Routing Method for NATFW NSLP (LEMRM)

Loose End Message Routing Method for NATFW NSLP (LEMRM). IETF 62 - March 2005 draft-stiemerling-nsis-natfw-mrm-01.txt Martin Stiemerling stiemerling@netlab.nec.de. Changes to -00. Changed major parts of Section 2 “Signalling the wrong way” Section 3 “LEMRM”

gause
Télécharger la présentation

Loose End Message Routing Method for NATFW NSLP (LEMRM)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Loose End Message Routing Method for NATFW NSLP (LEMRM) IETF 62 - March 2005 draft-stiemerling-nsis-natfw-mrm-01.txt Martin Stiemerling stiemerling@netlab.nec.de

  2. Changes to -00 • Changed major parts of • Section 2 “Signalling the wrong way” • Section 3 “LEMRM” • Added figures explaining what state installed where • Diff between -00 and -01 is available here: • http://www.stiemerling.org/ietf/nsis/draft-stiemerling-nsis-natfw-mrm-01_diff.html

  3. Use cases: NAT only • RESERVE-EXTERNAL-ADDRESS (REA) • Spotting the right upstream NAT • Reserving public reachable IP address • Easy case through route pinning • REA[PROXY] • Proxy mode support • Data receiver capable of NATFW NSLP only

  4. Use cases: Firewall only • UPSTREAM CREATE (UCREATE) • Spotting upstream firewall • Install ‘deny’ policy rules • How to spot these firewalls? • Spotting single firewall is easy • Multihomed networks • Not a case for LEMRM • data sender is known (at least IP address) • Similar case like localized QoS signalling.

  5. Installed State OLD

  6. Installed State NEW

  7. Open Issues • Applicability of LEMRM to other NSLP • Firewall handling for messages • Firewalls must forward NTLP D-MODE • Firewalls must permit NTLP C-MODE • Data receiver side: implies upstream NTLP must initiated C-MODE connection • Data sender side: implies that downstream NTLP must initiated C-MODE connection • Technical details still to be worked out • Need more comments from list

  8. Thank you! Questions?

More Related