1 / 8

EMA 405

EMA 405. Coordinate Systems. Introduction. There are many coordinate systems in ANSYS Global and Local: used to locate geometry items (nodes, keypoints , etc.) Display: determines systems in which geometry is displayed Nodal: degree of freedom directions and nodal results

gayle
Télécharger la présentation

EMA 405

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. EMA 405 Coordinate Systems

  2. Introduction • There are many coordinate systems in ANSYS • Global and Local: used to locate geometry items (nodes, keypoints, etc.) • Display: determines systems in which geometry is displayed • Nodal: degree of freedom directions and nodal results • Element: material properties and element results • Results: transforms nodal or element results for listing or display (general postprocessor) • Working plane: used for drawing geometric primitives

  3. Results Coordinates • General Postprocessor/Options for Output • For cylindrical, x-direction is r-direction, y-direction is theta direction, z direction is axial direction

  4. Why do we need these • Element system: consider wood elements with grain at 45 degrees • Easiest to define E separately in grain direction and perpendicular direction (rotate element system 45 degrees) y x

  5. Why do we need these? • Orienting geometry elements • Rectangles are always oriented relative to working plane • To draw rectangle such as the one below, rotate the working plane

  6. Why do we need these? • Nodal coordinates • What if we have a set of forces oriented radially • Just select nodes on perimeter, change nodal coordinate system to cylindrical, and then set Fx

  7. Exercise Only radial displacements p Inner radius=5 cm Outer radius=10 cm Angular extent = 45 degrees E=200 GPa =0.3 Pressure=1 MPa Only radial displacements

  8. Exercise • p=1 MPa • E=200 GPa • =0.3 • Inner radius is fixed • Inner radius = 5 cm • Outer radius = 10 cm

More Related