1 / 18

After 10.2

After 10.2. Last modified 9-30-10. What device can be used to connect a 10 Mbps Ethernet LAN to a 100 Mbps Ethernet LAN?. Crossover cable Switch Hub All of the above None of the above. 1 of 7. What part of this network requires the fastest throughput?. 2 of 7.

gcross
Télécharger la présentation

After 10.2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. After 10.2 Last modified 9-30-10

  2. What device can be used to connect a 10 Mbps Ethernet LAN to a 100 Mbps Ethernet LAN? • Crossover cable • Switch • Hub • All of the above • None of the above 1 of 7

  3. What part of this network requires the fastest throughput? 2 of 7

  4. What part of this UTP network cannot be longer than 100 meters? W+X+Y+Z Y X W+X+Y Something else 3 of 7

  5. Which cables should be crossover cables in this network? • X • Y • Z • More than one of the above • None of the above 4 of 7

  6. Which connection uses a straight-through cable? • Switch to switch • Switch to hub • Computer to computer • Computer to switch • Computer to a router Ethernet port 5 of 7

  7. What type of connector is this? Winchester RJ-45 Smart Serial DB-60 RJ11 6 of 7

  8. What type of connector is this? Winchester RJ-45 Smart Serial DB-60 RJ11 7 of 7

  9. After 10.4

  10. How many subnets are in this network? • 1 • 3 • 4 • 5 • 6 1 of 7

  11. Which subnet will be assigned the first address block? The serial link 128 hosts 900 hosts 1200 hosts Something else 2 of 7

  12. What address block is assigned to the 1200-host subnet? 147.144.64.0/20 147.144.64.0/21 147.144.64.0/22 147.144.64.0/23 Something else 3 of 7

  13. What address block is assigned to the 900-host subnet? 147.144.64.0/22 147.144.72.0/22 147.144.80.0/22 147.144.72.0/23 Something else 147.144.64.0/21 4 of 7

  14. What address block is assigned to the 900-host subnet? 147.144.64.0/22 147.144.72.0/22 147.144.80.0/22 147.144.72.0/23 Something else 147.144.64.0/21 147.144.72.0/22 5 of 7

  15. What address block is assigned to the 128-host subnet? 147.144.76.0/22 147.144.80.0/22 147.144.76.0/24 147.144.76.0/25 Something else 147.144.72.0/22 147.144.64.0/21 6 of 7

  16. What address block is assigned to the serial connection? 147.144.77.0/25 147.144.76.128/25 147.144.77.0/30 147.144.76.128/30 Something else 147.144.76.0/25 147.144.72.0/22 147.144.64.0/21 7 of 7

  17. Labs

  18. These labs require the Eagle Server 10.6.1 is really important! Your hands-on final exam will be similar to this lab! Practice it until you are good at it. 10.3.2 is a pencil-and-paper activity and does not require the lab 10.6.2 is clumsy in our lab—we use a Console Server instead Skip 10.6.3

More Related