1 / 38

Physics

Physics. Session. Particle dynamics - 4. Session Objectives. Session Objective. Motion of varying mass system (rockets) Problems . Session Opener. Rocket moves when fuel is ejected as gases (carrying some momentum).  Rocket gets a momentum in opposite direction.

gella
Télécharger la présentation

Physics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Physics

  2. Session Particle dynamics - 4

  3. Session Objectives

  4. Session Objective • Motion of varying mass system (rockets) • Problems

  5. Session Opener Rocket moves when fuel is ejected as gases (carrying some momentum)  Rocket gets a momentum in opposite direction.  Mass of rocket reduces.

  6. Motion of Varying System (Rockets)

  7. A rocket moving in free space has a speed of 3.0  103 m/s relative to earth. Its engines are turned on and fuel is ejected in a direction opposite the rocket’s motion at a speed of 5.0  103 m/s relative to the rocket. (a) What is the speed of the rocket relative to Earth once its mass is reduced to one half its mass before ignition ? (b) What is the thrust on the rocket if it burns fuel at the rate of 50 kg/s ? Illustrative Problem

  8. Solution (a) (b)

  9. Class Exercise

  10. A Jet a Class Exercise - 1 A block of mass 2.5 kg rests on a smooth, horizontal surface. It is struck by a horizontal jet of water at the flow rate of 1kg/s and a speed of 10m/s. What will be the starting acceleration of the block?

  11. Solution Water jet supplies the force as mass changes over time and velocity is constant. = 1kg/s × 10m/s = 10N This provides the acceleration to the block.

  12. T T F f m M Class Exercise - 2 Two forces f and F are acting on objects m and M respectively as shown. The horizontal surface is smooth and the spring joining the masses is light. What is the extension of the spring if its force constant is K? (F > f)

  13. T T F f m M Solution Total force providing the motion: F – f. Total mass accelerated: (m + M) For M: F – T = Ma For m: T – f = ma Substituting for ‘a’ in any of equations

  14. k P m Class Exercise - 3 A light spring, hanging from a rigid support, supports a light pulley. A light and unstretchable string goes around the pulley. One end of the string is tied to the floor and the other end supports a hanging mass m. If the mass has dropped by a height h, express k in terms of m and h.

  15. 2T k T T h T Let the spring stretch by x. Then the string moves by 2x. So when mass moves by h, the spring stretches by . T mg Solution

  16. 2mg = k. Solution Tension (force) on the spring = force on the pulley = 2T. T = mg as the mass is at rest  Spring force = 2T = 2mg = k(extension).

  17. r • • Insect Class Exercise - 4 An insect inside a hemispherical bowl is trying to climb out. The radius of the bowl is r and the coefficient of friction between the bowl and the insect is m . How high can the insect climb?

  18. O r y q j N h Tangent mg Solution FBD of insect gives [at the point where it can reach. Beyond that point mgsinq > f and insect will slip down.] N = mg cosq, f = mgsinq f = mN = mmg cosq  tan = m

  19. f N q q mg cos q mg sin q Solution

  20. q 90o M Class Exercise - 5 A mass m is sliding down an equally inclined right angled trough, inclined to the horizontal by an angle q. m is the coefficient of kinetic friction between the trough and m. What is the acceleration of the mass?

  21. N y M N = 2N1 cos45 = mg q x Solution The block has two surfaces of contact. So mgsinq – mN1 – mN2 = ma ... (i) |N1| = |N2| (surfaces identical)

  22. N N1 N2 So (i) Solution But N = mgcosq

  23. A a B Class Exercise - 6 • A block A of mass 2 kg rests on top of a block B of mass 3 kg which is on the floor of a lift. The lift accelerates upward with an acceleration of 2m/s2. Find the normal reaction on B by the floor. • (g = 10m/s2)

  24. NA A a B a NA NB mg mBg Solution Using FBD of A Using FBD of B • = 5 × 12 = 60N

  25. N P1 T1 P2 A c T2 200 N B 300 N Class Exercise - 7 In the given figure the weight of A, hanging from a fixed, light pulley is 200 N and that of B, hanging from a free pulley is 300 N. Find the tensions T1 and T2 (g = 10m/s2)

  26. From FBD of P2, 2T1 = T2 B will rise as upward force on it (T2) is more. T1 T1 Noting that when A falls by y, B rises by and in time t P2 T2 Solution

  27. From FBD of A and B, • T2 – mBg = mBaB mAg – T1 = mAaA T1 T2 B A aA aB 100 = (80 + 30)aB mBg mAg Solution

  28. Putting aB in (ii) = 163.6N T2 = 2T1 = 327.2N Solution

  29. rod A B F C Class Exercise - 8 Three blocks A, B and C, weighing 3kg, 4kg and 8kg respectively are arranged one on top of other as shown. Top block A is attached to a rigid wall by a rigid, light rod. Blocks B and C are connected to each other by a light, unstretchable string passing around a light pulley. Find the force F to drag block C with constant speed. All surfaces have coefficient of kinetic friction equal to0.25(g = 10m/s2)

  30. NA NB NA R For B: f1 T f1 f2 MAg MBg Solution

  31. For C: F – T – f3 – f2 = 0 NC NB f2 T F f3 MCg = 0.25 × 10 × 32 = 80.0N Solution

  32. A F B Class Exercise - 9 Block A has a mass of 200 gm and block B has a mass of 700 gm in the arrangement shown. Coefficient of friction is 0.2. How large should be the value of force F so that block B has an acceleration of 0.5m/s2? (g = 10m/s2). Friction is present at all the contact surfaces.

  33. For mA: T – f2 = mAa NA f2 T f2 T F a a MAg f1 NA MBg NB Solution

  34. F = Solution = (0.2 + 0.7)0.5 + 0.2 (0.7 + 0.6)10 = 0.45 + 2.60 = 3.05N

  35. M m Class Exercise - 10 In the arrangement shown, when m is 3.0 kg its acceleration is 0.6m/s2 and when m is 4.0kg its acceleration is 1.6 m/s2. Find the frictional force on M and the mass of M. Assume the pulleys to be massless and strings to be light (g = 10m/s2)

  36. mg – 2T1 = ma ... (i) m 2T1 T1 – f = M.2a m 2T1 – 2f = 4Ma ... (ii) T1 Using (i) and (ii) T2 = 2T1 mg – 2f = (m + 4M)a Solution

  37. as given for m = 3kg a = 0.6m/s2 3 × 10 – 2f = (3 + 4M)(0.6) ... (iii) Solution and for m = 4kg a = 1.6 m/s2 Using (iv) and (iii) 40 – 30 = 6.4 + 6.4M – 1.8 – 2.4M  4M = 5.4 M = 1.35 kg • Substituting M in (iii), 2f = 30 – (3 × 4 × 1.35) (0.6)= 12.48N

  38. Thank you

More Related