1 / 12

CNC Practicum MAE 165

CNC Practicum MAE 165. Eric Berlin Jason Sarkozi Brandon Tsuge Matthew Woo 05/14/10. Overview. Introduction Steps for CNC Computer Modeling and Programming Machine Preparation Machining Finish Product Conclusion. Bridgeport CNC Machine. Introduction.

gerek
Télécharger la présentation

CNC Practicum MAE 165

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CNC PracticumMAE 165 Eric Berlin Jason Sarkozi Brandon Tsuge Matthew Woo 05/14/10

  2. Overview • Introduction • Steps for CNC • Computer Modeling and Programming • Machine Preparation • Machining • Finish Product • Conclusion Bridgeport CNC Machine

  3. Introduction • A CNC machine is a computer numerically controlled machine • It is used to mill and drill work pieces in need of tight tolerances. • The CNC used was a Bridgeport made in 1995 with 3 axes. Calibration and tool changing needed to be done manually. Current machines utilize up to 5 axes with automatic tool changers.

  4. Process: Modeling Parts are first modeled in a CAD program like Solidworks Sample Solidworks Model Models can then be imported into a CAM program, where various parameters and tools are chosen. A text file is exported and is then used by the CNC machine. Sample Featurecam Model

  5. Process: Preparation • The tools are lined up neatly in a rack in the order they will be used in the CNC machine. • Lubricant is used for the countersink drill bits to remove heat • Safety goggles should be worn at all times during the CNC process Tools for CNC Machine

  6. Process: Machine Preparation • Use a vice and spacers to hold the part elevated • Make sure that the sides of the part are parallel to the axis of the path • Use a test indicator to run parallel with the part to test for any displacements on the probe Alignment Process • Use a spring loaded edge finder to align the part with the tool. • When the tip of the tool spins flush with the tool itself, then the edge of the part is at the center of the edge finder Setting the Z-Axis Process for Each Tool

  7. Process: Machine Preparation • A dial is used to make sure the distance from the tool to the part is two inches. • Record the Z position offset of two inches to the memory • Repeat the process for each tool used in the CNC process A lubricant and Air Tube is Used to Cool the Part • Lubricant is used to lubricate and remove the heat from the part • If no lubricant is used, you can lose the temper of the tool meaning that the tool will become softer Dial Used to Accurately Line the Tool with the Part

  8. Process: Machining Holes are spot drilled, the drilled then finished with a tap or countersink. The center hole is milled out. During the process the air pump continuously blows away debris. All Holes Drilled and Tapped or Countersinked Center Hole Milled Out

  9. Video of Machining

  10. Process: Finished Product • The part is removed from the milling machine • The burrs are removed with either a “deburring tool” or a hand file • The part is rinsed off with water and simple green to remove any metal chips that may be hanging on to the part • The end result is a clean, finished product Cleaned, Finished Product

  11. Conclusion • Standard CNC machines generally can machine accurately to .001 - .0005 in. • Cutting speeds depend on many factors (material being machined, lubricants being used, type of cutting tool, etc.) but are generally in the .003 - .012 in. chip per tooth range • Pros: relatively accurate, cheap and fast for mass production, high removal rates, programmable • Cons: set up time, initial capital outlay, expensive for prototyping

  12. Pictures

More Related