160 likes | 294 Vues
STATUS QUO. Transitional Shelter development. Basis Proto type B floor size / usable space per person ventilation position meeting requirements wind & snowload > bracing constructing frame with L-profiles. FLOOR SPACE. tent for 5 persons 3,5 m2 / person > 17,5 m2 Question:
E N D
STATUS QUO Transitional Shelter development • Basis Proto type B • floor size / usable space per person • ventilation position • meeting requirements wind & snowload > bracing • constructing frame with L-profiles
FLOOR SPACE • tent for 5 persons • 3,5 m2 / person > 17,5 m2 • Question: • Is this the footprint of the complete tent including porches or only the inner tent floor space? Transitional Shelter development
FLOOR SPACE Transitional Shelter development • Size frame Prototype B • 5,15 x 3,23m = 16,65 m2 • = 0,85 m2 short • If only inner tent: 14,4 m2 > 3,1m2 short • LWET is 14,85 m2 inner floor space • Should a transitional shelter, intended to be used for longer period, not have more space per person?
FLOOR SPACE Transitional Shelter development • Increasing footprint to 17,5 m2 using 200 cm L-profiles • New size: 3,54 (= + 31cm) x 5,06 (= - 9cm) • Or: • Floor space innertent = 17,5 m2 > • New size: 3,54 (= + 31cm) x 5,45 (= + 30cm) • Results: • height of tent increases with 40cm to 310cm! • strength profiles need to be recalculated!
Transitional Shelter development Foot print 17,5 m2
VENTILATION Transitional Shelter development • Creating adequate ventilation is important in any tent, but maybe even more in the Transitional Shelter. • To keep the vents well supported and within the frame concept, the ideas from prototype A should be integrated in the final design. • Depending on what size we go forward, we can go for different solutions:
VENTILATION Transitional Shelter development Foot print inner tent 17,5 m2
VENTILATION Transitional Shelter development Foot print full tent 17,5 m2
BRACING • Bracing the frame construction with cables is essential to meet the requirements on wind speed and snow load. Transitional Shelter development
BRACING Transitional Shelter development Needed on the middle portal too! It will restrict head space but can be integrated in a separation wall between man and woman compartments
PROFILES • The L-shaped profiles need to be all the same in length and possibilities to connect to each other. • The profiles have holes drilled in to bold the parts together. Transitional Shelter development
CONNECTIONS • Making the connection between the profiles in the different corners is worked out well in the prototype. Transitional Shelter development
Transitional Shelter development Corner connection
Transitional Shelter development Roof bar connection
OVERLAPPING PROFILES • The overlapping sections need not just a hole, but also sleeves to make connection possible. • more expensive to make • weakens the profile Transitional Shelter development
QUESTIONS Transitional Shelter development • 17,5 m2 for 5 persons > footprint complete tent or only inner tent? • Height of 310 cm? Is this acceptable? • Added cost to meet wind and snow load requirements • Unused space > nice in hot weather, unwanted in cold weather • Using different lengths of profiles acceptable?