xPCGear MCE Remote Control Transceiver Learning Procedure

1. xPCgear.comMCE Remote Control Transceiver Learning Procedure

2. Press the Green LOGO on remote control to start Windows MCE

3. Select settings from tasks

4. Select TV

5. Select Set Up TV Signal

6. Click “Yes”

7. Click “Next”

8. Confirm your region and click Next

9. ”Download Failure” will show if you are not connected to the Internet

10. Select “Cable”

11. Yes

12. Click “Next”

13. Select “Enter Channel” and enter a random number and then click “Scan again”

14. Select Next

15. Select “Yes” and then click “Next”

16. Click “Next”

17. Follow these instructions to setup your new MCE Remote Control from xPCGear.com

18. Select the second option and then click “Next”

19. Click “Next”

20. “Yes, it does” and “Next”

21. Follow the instructions to operate the remote control you want to learn (Please aim the remote control at the receiver)

22. Click “Next”

23. Select the option by your requirement

24. Select the option by your requirement

25. Test if the channel changing is correct

26. If it is correct, click “Next”

27. Press Chl+ Chl- to change channel

28. Click “Next”

29. Congratulations! You are done!